Tobias Kern Posted January 19, 2017 Share Posted January 19, 2017 Hi, a usefull Extension for the Autohybrid-Tool could be the Option to choose from which view (not only from the Top-View) the Tool works. From: Top, Front, Back, Left or Right The Cut-height 0,00 m should be calculated from the outer Edges from the 3D-Modell or relative to the Zero-Point from the World (choosable). ... so you don't have to Rotate the 3D-Modell for a e.g. a Cut-View from a Modell from the Front. The Cut-height should be visual in Editormode and manipulable via Mouse or via Key-Input. 1 Quote Link to comment
Question
Tobias Kern
Hi,
a usefull Extension for the Autohybrid-Tool could be the Option
to choose from which view (not only from the Top-View) the Tool
works.
From: Top, Front, Back, Left or Right
The Cut-height 0,00 m should be calculated from the outer Edges from the 3D-Modell
or relative to the Zero-Point from the World (choosable).
... so you don't have to Rotate the 3D-Modell for a e.g. a Cut-View from a Modell from the Front.
The Cut-height should be visual in Editormode and manipulable via Mouse or via Key-Input.
Link to comment
0 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.