Jump to content

Question

I am having an issue orbiting around models in 3D view. When I orbit around the models in narrow perspective the models disappear as the camera rotates. When I orbit in orthogonal mode, various geometry obscures itself and stretches over the screen whilst bits of the model also disappear.

 This issue also extends to my viewports as some of them wont render the models depending on the elevation angle. However when I go into the viewport the models do appear until I begin rotating.

The file has 2 other files referenced into it. However all of the drawings are centred on the origin, which are close to the 0,0 axes. 

Any ideas?

Screen_Shot_2017-01-06_at_15_48_44.png

Screen_Shot_2017-01-06_at_15_48_55.png

Screen_Shot_2017-01-06_at_15_49_10.png

Screen_Shot_2017-01-06_at_15_49_17.png

Screen_Shot_2017-01-06_at_15_49_30.png

Share this post


Link to post

2 answers to this question

Recommended Posts

  • 0

Under Tools > Options > Vectorworks Preferences > Display, does the same behavior happen both when you have Navigation Graphics set to Best Compatibility as well as Best Performance? Test with both settings and let me know, please.

Share this post


Link to post
  • 0

The different settings have no effect. Still the same result. Unusually, the issue is only occurring with the model in the file which is not referenced. When I turn off the layers which the non-ref model is on, the file works fine. When I turn off the referenced layers and turn on the model in the file this issue occurs. 

 

However, the issue began when I was moving the origin to the centre of the drawing on all the files (ref & non ref).  

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...