sww1235 Posted December 18, 2016 Share Posted December 18, 2016 Hello: I have used the extrude along path tool to create a custom curved builtin bookshelf, however on top/plan view it is not showing up with my chosen fill. I found this thread about converting it to an auto-hybrid, however none of the settings I have found in the auto-hybrid settings, allow me to use the fill in top/plan view like my wall objects. I would assume there is something small but important I am missing. Thanks in advance Quote Link to comment
Diamond Posted December 18, 2016 Share Posted December 18, 2016 Can you post screenshots of each Auto-hybrid settings tab so we can walk you through it? Cheers. Quote Link to comment
AlanW Posted December 18, 2016 Share Posted December 18, 2016 Hi, Have a look at this file especially the classes and under the Auto Hybrid the 2D appearance settings. HTH Auto Hybrid Pergola.vwx Auto Hybrid Pergola v2016.vwx 1 Quote Link to comment
sww1235 Posted December 18, 2016 Author Share Posted December 18, 2016 @Alan WoodwellThank you so much for the example files. I missed the importance of having the display extents above cut plane turned on. 1 Quote Link to comment
AlanW Posted December 18, 2016 Share Posted December 18, 2016 After you set up your auto hybrid style at the bottom save the current settings as the default and always keep the 3 classes I every template file. Now whenever you create on it automatically assigns these classes. If sometimes you find you can't change the appearance of an item in a viewport that is on a certain class and it's an auto hybrid you may need to change the auto hybrid and not the class the object is on when adjusting through a viewport. Quote Link to comment
Diamond Posted December 18, 2016 Share Posted December 18, 2016 Thanks Alan. Cheers. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.