Jump to content
Christian Fekete

Window/Door trim

Recommended Posts

In the image plan below you can see the trim at 3/4" for both window and cased opening. I see three issues here:

1/ the window, in blue trim is not on top of the drywall layer of the wall (the outside layer of the wall is the base plate which is below the window)

     Can I arrange this properly to 4 3/4"

2/The door in grey has trim which is inside the thickness of the drywall.

     Can I arrange this properly to 4 3/4"

3/ The wall cut line should be 4 3/4" also and the baseboard should have a thinner line shouldn't it?       

 

 

 

 

Screen Shot 2016-10-25 at 4.21.20 PM.pngScreen Shot 2016-10-25 at 4.21.57 PM.png

window_trim.vwx

Share this post


Link to post

I guess I will answer my own question 1&2, both controls are in the respective door and window style settings under jamb depth.

As far as the outline of the cut wall, still not sure, if I hide the wall details the wall thickness includes the baseboard !Screen Shot 2016-10-25 at 4.33.31 PM.png

Share this post


Link to post

Hi, your wall-interior class is controlling the outside lines of your wall. This should be controlled by you wall style. I bumped the line weight up to 2 to show it.

And the reason the door jamb doesnot fit the wall is the wall is 4 3/4 wide and the door style is set to 4 1/2". I the attached file i set it to 4 3/4 and fits. I would have thought that you can set the walls to take the wall thickness by default. 

Also you had a double line showing up when you turn on zoom line thicknesses. Look at the wall style, I tend not to have 2 thick ones on top of each other.

HTH

Capture.JPG

Capture.JPG

 

window_trim_(1).vwx

Edited by Alan Woodwell

Share this post


Link to post

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...