POA Posted November 14, 2014 Share Posted November 14, 2014 Today's questions, and the third in the series, has to do with wall projections. I have created a series of wall projections to show cladding joints across the face of the building. I have then inserted some windows into the wall which, in 3D, have cut the projections as planned and all is well. In 2D however the wall projections are appearing in the middle of the windows. The wall is still cut as expected but the projections are not. Has anyone got any ideas why, or ways around this? Quote Link to comment
Guest Wes Gardner Posted November 14, 2014 Share Posted November 14, 2014 Hi Mark, Can you take a screen shot? I took a couple of quick shots, one (in elevation) is using wall recesses and the other (iso view) is using wall projections Wes Quote Link to comment
Bas Vellekoop Posted November 17, 2014 Share Posted November 17, 2014 Hi Wes, How do you continue this around corners? Quote Link to comment
POA Posted November 17, 2014 Author Share Posted November 17, 2014 Wes, I have attached a couple of screen shots, one Axo showing the window cutting the wall projections and one plan showing the window not cutting the wall projections. I have tried adjusting the cut plane of the 'Feature in Wall' to no effect. As always any help, tips or advice would be greatly appreciated. Quote Link to comment
Guest Wes Gardner Posted November 17, 2014 Share Posted November 17, 2014 Hi Mark, Currently, I'm going to call that a bug and will investigate and file a report for you. Thanks for pointing it out! Wes Quote Link to comment
POA Posted November 17, 2014 Author Share Posted November 17, 2014 Wes, Much obliged, any good tips for manipulating the plans in the mean time? Turning off the wall projections just leaves some hefty gaps in the walls. Quote Link to comment
Guest Wes Gardner Posted November 17, 2014 Share Posted November 17, 2014 Mark, In my simple test file (included), the beige wall that has both vertical and horizontal recesses does NOT read properly, the black wall with only a vertical recess seems to read OK, I'm still testing... Wes Quote Link to comment
POA Posted November 18, 2014 Author Share Posted November 18, 2014 Wes, Thank you for running this through. Just to point out the differences I was using projections rather than recesses, and only vertical elements. The issues were at points the vertical projections ran through the window opening. Don't know if these make any difference or not. Quote Link to comment
VincentCuclair Posted November 18, 2014 Share Posted November 18, 2014 Mark, I suggest you dump Wall Recesses/Projections all together and use symbols in a technique explained in this thread: https://techboard.vectorworks.net/ubbthreads.php?ubb=showflat&Main=39920&Number=198112#Post198112 In my experience Wall Recesses/Projections are very prone to buggy and irregular behaviour as well as being quite limited in its functionality. It is a feature that definitely needs a lot of attention before being usable to any reasonable degree. Quote Link to comment
POA Posted November 18, 2014 Author Share Posted November 18, 2014 Vincent, I started using the wall projections so that they would be automatically cut by windows and it would be easy to resize and move the windows without worrying about them. I shall see if anything comes of this thread but I'm starting to think you might be right. Good thing the 3d modelling tools are nice and simple to use! Also thanks for the link, most helpful. Quote Link to comment
VincentCuclair Posted November 18, 2014 Share Posted November 18, 2014 (edited) Check it out but basically you are using the symbol hole 'feature' to create a recess so any windows, door etc will work as normal, it does however mean you'll need to create an extra component in your wall so that once the symbol is place it removes the rest of the component to leave the protrusions....... Edited November 18, 2014 by Vincent C Quote Link to comment
VincentCuclair Posted November 18, 2014 Share Posted November 18, 2014 (edited) In the attached image all the white grooves in the facade are done using this Symbol Hole Component method in the outer wall component, they are in effect recesses done by a symbol.......as you can see the windows and ddors cut right through them. Edited November 18, 2014 by Vincent C Quote Link to comment
POA Posted November 21, 2014 Author Share Posted November 21, 2014 Thanks Vincent, I have finally had a chance to try this and I can't see how to get it to work for projections. The windows just won't cut it because it is a separate element. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.