Tobias Kern Posted November 5, 2014 Share Posted November 5, 2014 hi there, following my first ideas for an upcoming new version of vectorworks: (sorry i'm a non native english speaker) 1. option to setup transparency separately for fillings (solids) an lines of an objects (in vw 2015 transparency can only be managed for the whole object) 2. autohybrid 2.1 hidden lines below the cut-height should be controlable via a separate height (depth limit), in vw 2015 the all hidden lines are shown below the cut-line. 2.2 maybe a picto who show the total height of the autohybrid object with all visible lines (cut-line, depth limit of the lines above an below with their depth and the layerheight and/or storeyheight), so you have a visible control over the settings. 2.3 a preview button 2.4 option for cut-height relative to object 2.5 more cut-heights per autohybrid objects, with all the settings per cut-height and option to generate viewports of the cut-heights. 3. cutbox the possibility to generate a cut of an object in horizontal direction (vw 2015 allows only vertical cuts) 4. visibilty/gui the option to show all endpoints of all objects permanently. so you have a better visible control over the geometry. 4.1 the option to show lines in the colors of the axis, if they are in the same direction as the axis (red, green, blue) 4.2 all minus axis should shown as dashed lines 4.3 a option like the autocad-dice, who show where im looking at (front, rear, left, right, from above, from below, ...) 5. the option to generate nurbs-surfaces with more than two paths 6. push/pull tool 6.1 option to activate and push/pull more than on surface at once. 6.2 the push- or pull-directions should always the plus-direction of the input-field. 7. visible surfaces of cuts in the 3d space like sketchup dit it. 8. the option to set the different mouse buttons to all tools i want in the setup 9. the option to snap only the visible points in viewports (in x-ray mod snap to all points) 10 the option to show more than one workings-windows of one scene like cinema 4d offers. maybe four windows at once front view left or right view, view from above, perspective each window must separately controllable. Quote Link to comment
0 zoomer Posted November 5, 2014 Share Posted November 5, 2014 3 6.1 6.2 (in any Tool - positive is where the cursor points) 7 (yes - for Meshes) 8 10 (of course) +1 Quote Link to comment
0 Benson Shaw Posted November 5, 2014 Share Posted November 5, 2014 Regarding #5 Using the Loft Surface tool, NURBS surfaces can be formed from as many paths as desired. Not limited to 2 paths. Or is this wish referring to some other NURBS function? -B Quote Link to comment
Question
Tobias Kern
hi there,
following my first ideas for an upcoming new version of vectorworks:
(sorry i'm a non native english speaker)
1.
option to setup transparency separately for fillings (solids) an lines of an objects
(in vw 2015 transparency can only be managed for the whole object)
2.
autohybrid
2.1
hidden lines below the cut-height should be controlable via a separate
height (depth limit), in vw 2015 the all hidden lines are shown below the
cut-line.
2.2
maybe a picto who show the total height of the autohybrid object
with all visible lines (cut-line, depth limit of the lines above an below
with their depth and the layerheight and/or storeyheight),
so you have a visible control over the settings.
2.3
a preview button
2.4
option for cut-height relative to object
2.5
more cut-heights per autohybrid objects, with all the settings
per cut-height and option to generate viewports of the cut-heights.
3.
cutbox
the possibility to generate a cut of an object in horizontal direction
(vw 2015 allows only vertical cuts)
4.
visibilty/gui
the option to show all endpoints of all objects permanently.
so you have a better visible control over the geometry.
4.1
the option to show lines in the colors of the axis, if
they are in the same direction as the axis (red, green, blue)
4.2
all minus axis should shown as dashed lines
4.3
a option like the autocad-dice, who show where im looking
at (front, rear, left, right, from above, from below, ...)
5.
the option to generate nurbs-surfaces with more than two
paths
6.
push/pull tool
6.1
option to activate and push/pull more than on surface at once.
6.2
the push- or pull-directions should always the plus-direction
of the input-field.
7.
visible surfaces of cuts in the 3d space like sketchup dit it.
8.
the option to set the different mouse buttons to all tools i want
in the setup
9.
the option to snap only the visible points in viewports
(in x-ray mod snap to all points)
10
the option to show more than one workings-windows of one scene
like cinema 4d offers.
maybe four windows at once
front view left or right view, view from above, perspective
each window must separately controllable.
Link to comment
2 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.