RCrussellUK Posted November 20, 2013 Share Posted November 20, 2013 (edited) Here in the UK Bay Windows are fairly regular features in existing housing stock. I encounter a fair few I will need to model. I saw somewhere you can buy a plug in to help with the process, which is a bit cheeky after spending ?2k on the software, is there really no way VW architect alone, helps with this window type? To use the bay as a window, I imagine I will need to produce it completed, as a hybrid/plug-in symbol? (I'm still only vaguely aware of what a hybrid/plug-in symbol actually is). This means modelling the entire thing as geometry and assigning materials to each component then transforming all into a component right? If any one can link to a good tutorial or previous discussion that would help with all of this I would be immensely grateful. This is tonights homework as part of a project to show a client in the morning! (Luckily they know and accept I am in the process of transferring to VW). Thanks again! Edited November 20, 2013 by RCrussellUK Quote Link to comment
mike m oz Posted November 21, 2013 Share Posted November 21, 2013 The Window tool can only have a corner at one end and that means you can't model bay or bow windows with it. Windoor from Ozcad (the Australian distributor) can do it because it can have corners at both ends. The bad news is that international users can no longer buy it. Quote Link to comment
RCrussellUK Posted November 21, 2013 Author Share Posted November 21, 2013 Surely this is a major omission... if NV do not supply a bay window plugin, could they not at the very least allow corner windows to join at both ends? Bay windows are such common things! I guess I could model each one individually. Or could I use some sort of faceted window wall coupled with a standard wall? Quote Link to comment
RCrussellUK Posted November 27, 2013 Author Share Posted November 27, 2013 I have 3 important questions... I will send one of them to Computers 'Unlimited' and maybe they can tell me why? Why is WinDoor not available in the UK? Why is WinDoor not available in the UK? Why is WinDoor not available in the UK? I just watched a video on ozcad... Uk users can only get upgrades but cannot buy a new licence of Windoor?? The thing that really puzzles me, is why this useful tool is not included along with VW architect out of the box??? Quote Link to comment
VincentCuclair Posted November 27, 2013 Share Posted November 27, 2013 (edited) The thing that really puzzles me, is why this useful tool is not included along with VW architect out of the box??? I think it is in Australia :grin: (Don't know if it is possible but you can buy mine......) Edited November 27, 2013 by Vincent C Quote Link to comment
RCrussellUK Posted November 27, 2013 Author Share Posted November 27, 2013 You had to buy it separate in Sweden? Why do Australians get preferential treatment! Have you found it to be useful? Quote Link to comment
VincentCuclair Posted November 27, 2013 Share Posted November 27, 2013 (edited) Very useful it has basically everything we miss in the native tool BUT like always it's a plug-in and needs to be treated as such. Different reports and scripts than the native tools, opening old files in new versions and the windows and doors cannot be edited.....(at least in my experience, there may be workarounds for this) etc. Edited November 27, 2013 by Vincent C Quote Link to comment
mike m oz Posted November 27, 2013 Share Posted November 27, 2013 Vincent, like any other add on you need to upgrade it for each new version. The cost of doing that is quite modest. Quote Link to comment
RCrussellUK Posted November 27, 2013 Author Share Posted November 27, 2013 So there's no official way of purchasing this in the UK? Out of interest can an existing license be transferred? Meanwhile are there no substitutes for it? Quote Link to comment
mike m oz Posted November 27, 2013 Share Posted November 27, 2013 Not any more. Best thing you can do is talk to the UK distributor about having a bay window capability added to Vw. Given how common bay windows are in the UK it would seem to me to be a must have capability. Quote Link to comment
Eoin R Posted November 27, 2013 Share Posted November 27, 2013 Russell It is worth pursuing this one. We are existing Windoor users and the tool is invaluable and almost irreplaceable for our work as Architects. Someone in Vectorworks should contact Ozcad to see if it can be made available outside Australia/NZ or better still they should incorporate Windoor into Vectorworks as the tool is far superior for creating, editing and modifying doors and windows. Eoin R Quote Link to comment
RCrussellUK Posted November 27, 2013 Author Share Posted November 27, 2013 I've sent feedback to Computers Unlimited... Will let you know what the response is. Quote Link to comment
Jonathan Pickup Posted November 27, 2013 Share Posted November 27, 2013 The thing that really puzzles me, is why this useful tool is not included along with VW architect out of the box??? Windoor is made by the Australian distributor, that?s why they get special treatment. In some countries windoor is included with Vectorworks, but it relies on the local distributor. In NZ the local distributor has arranged that for us. Other distributor may not want that arrangement, you'll have to ask them why. Quote Link to comment
RCrussellUK Posted November 30, 2013 Author Share Posted November 30, 2013 This is my attempt at the bay window, took a little patching in plan view but I think it looks okay in 3D. Quote Link to comment
Bob Holtzmann Posted November 30, 2013 Share Posted November 30, 2013 Just a tip for bay windows in residential construction - there should be room for a couple of studs (i.e. 3") between each window unit. This is so because window units generally are shimmed and screwed along the jambs of the rough window openings. Windows can then be removed and replaced in this manner, during the lifespan of the house. So in Vectorworks, the bay windows will be placed in the bay walls and have 3" between them, especially at the corners, where the wall framing would be supporting the bay roof. Quote Link to comment
RCrussellUK Posted November 30, 2013 Author Share Posted November 30, 2013 (edited) This isn't a proposed bay window, it's based upon existing where the frames give the appearance of touching, the junction concealed only by a plastic trim, I think there may be slender wedge shaped stud or something concealed within the frame depth, but it's not evident on the outside. The work we're doing isn't with this side of the house, so luckily we don't need this for more than illustrative purposes. Saying that I'd like to develop best practice in all that I do (good habits!) and may need this for the future, so I'm interested in making it more correct. This is not very accurate in terms of showing the junctions or indeed the exact dimensions of the window unit (I have the bay measurement and the window is inferred from a photo). I placed one wall above the bay, flush with the inner wall, one below, beneath the window, then sitting the windows together as a group on an extrusion for the sill, and a number of extrusions added together for the roof. It isn't really accurate in terms of the model either, I can only get one of the walls at a time to join with the main wall (either the one above or the one below) and the windows are not 'in' the wall, they are just positioned as objects. A previous version I made was more like what you say, I inserted windows into a wall which was bound to the roof. Thus they were properly inserted and had some structure between each unit. Unfortunately though, this was incorrect in terms of how the actual window appears (and of course we can't make corner windows that join on both sides). Edited November 30, 2013 by RCrussellUK Quote Link to comment
Patrick Fritsch Posted December 1, 2013 Share Posted December 1, 2013 Hi Bob just for correctness in case someone from NNA is reading to revise the tool. Bay or Bow windows can be manufactured as a unit, therefore no studs required to fasten between each window jamb. Check out these as an example http://www.pella.com/windows/explore-window-styles/bay-bow.aspx As for support of the roof it can simply be fastened to the wall with a bolted ledger. This eliminates the need for posts. Quick way to do this is as Russell has done, stick a bunch of windows together with maybe an extrude at the angles to fill any gaps, turn it into a symbol, Edit the wall opening component of the symbol and insert into wall. Quote Link to comment
Patrick Fritsch Posted December 1, 2013 Share Posted December 1, 2013 (edited) Attached is a pict of a quick and dirty bay symbol inserted into a continuous back wall with short walls below the bay window. You can play with the "opening in wall" component of the symbol if you want a seat-sill or other see attached VWX file. Edited December 1, 2013 by Fritsch Quote Link to comment
RCrussellUK Posted December 1, 2013 Author Share Posted December 1, 2013 Ahh good, I think you've helped me realise how I can make the wall work correctly, thanks Fritsch. Quote Link to comment
Guest Wes Gardner Posted December 2, 2013 Share Posted December 2, 2013 As Patrick suggests, Bay/Bow windows CAN be ordered as a single unit - they are REALLY heavy (the cost of hernia op will vary according to your area :-) We should be able to create these as a matter of course - I think all will agree they are a fairly common window type. Wish List... Quote Link to comment
RCrussellUK Posted December 2, 2013 Author Share Posted December 2, 2013 Added to wish list http://techboard.vectorworks.net/ubbthreads.php?ubb=showflat&Number=192729#Post192729 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.