Door Schedule/Report

[visard]

I've got unwanted hardware sets showing up in my door schedules. Door settings show no hardware selected. Where else should I check to find and eradicate this false data?

Thanks,

[Jim Smith]

Visard,

- Is this information part of the Doors on your schedule or a stray piece of information?

- Does this happen to all Doors or just some?

- Are your doors Symbols or PIOs?

- If Symbols, have you created them from the PIO or used a 3rd party's Door Symbol?

- Could this be the result of incorrect Data on a door in the OIP?

- Have you tried a Custom Selection to see if you have a phantom door 200M away from your plan?

[visard]

These doors are PIO's. The information comes in when doors are placed. Not all doors in the set display hardware but all new doors placed have a default hardware (HDW-3) which shows in the schedule. No third party symbols have been used. No hardware is selected in the object info window or in the PIO preferences. The door schedule data base header is =('Door'.'HWSetID') This does not appear to be the result of a 'lost' object because the object count is correct. The funny thing is that the HD set displays as HDW-3 which seems to reference the typical office specification set but which has not been used here. All User Fields in Door Settings Data have been checked - all are blank and hardware settings box is not checked. Where is the 'HWSetID' data?

I appreciate your comments, Jim.