alfresco Posted March 8, 2013 Share Posted March 8, 2013 I have just created a site model. I validated the data and checked for accuracy. The site model is however appearing without contours. When I look at the model in an isometric perspective there appears to be surface deflection. What should I be correcting to have contours appearing? Thanks lm Quote Link to comment
CipesDesign Posted March 8, 2013 Share Posted March 8, 2013 For 2d Contour, view in Top Plan, make sure that in the OIP "2d Style" is set to "2d Contours". For 3d contours, view in any 3d View, make sure the "3d Style" is set to "3d Extruded Contour". Quote Link to comment
Benson Shaw Posted March 8, 2013 Share Posted March 8, 2013 Also, in the OIP>Site Model Settings there is a checkbox for Show 3d Contours which makes the contour lines appear in renders and wireframe views of most 3d styles (Triangle, Grid, Mesh, etc). The contours coincide with edges of the Extruded Contour 3d style. The color and line size of the contours can be adjusted in the Site Model Settings>Graphic Properties. -B Quote Link to comment
alfresco Posted March 11, 2013 Author Share Posted March 11, 2013 Gentlemen, Thank you very much for your input. I have checked and setting are as you have indicated. Ironically, the site model settings check box for 3D Contours is greyed out and I am unable to check? Why would I not be able to check that box? Thanks lm Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.