MikeN Posted April 19, 2002 Share Posted April 19, 2002 P4 1.4gHz512mb RAMWinXP ProVWA 9.5.1HP Design Jet 600 HP provides numerous drivers for the HP DJ 600. Can anyone reccommend the preferred driver for my particular setup? Quote Link to comment
wdickert Posted April 19, 2002 Share Posted April 19, 2002 There are two drivers listed under WinXP at the HP driver page. If you click on them and look at the descriptions, one says it is for XP and the other says it is for NT4. The XP driver should be pl532en.exe. Quote Link to comment
Matthew Giampapa Posted April 20, 2002 Share Posted April 20, 2002 Actually, we know of a bug regarding the newer 4.6.1 driver for that series plotter. Currently, the 4.61 revision of the HP DesignJet driver can not print fill patterns from VectorWorks. Instead you will get a solid black fill. We recommend the version 4.40 driver for these models at this time. At this time we haven?t tested the 4.60 driver extensively since it was only available for a short time. However it may also produce correct fill patterns. Let me know if you can't locate the older 4.40 driver. Matthew GiampapaNNA Technical Support Quote Link to comment
Mat Caird Posted June 25, 2002 Share Posted June 25, 2002 I need the old driver u speak of. Can u pls email it to me matcaird@hotmail.com Thanks Quote Link to comment
Matthew Giampapa Posted June 26, 2002 Share Posted June 26, 2002 What platform do you need? Windows NT/2K/XP or Windows 95/98/ME. Also, hotmail does not like 1 meg+ email attachments. If you want to avoid posting your email address publicly for SPAM bots to catch, you can just email your request to tech@nemetschek.net Matthew GiampapaNNA Technical Support [ 06-25-2002: Message edited by: Matthew Giampapa ] Quote Link to comment
Mat Caird Posted June 26, 2002 Share Posted June 26, 2002 I got the version 4.60 driver off HP and it seems to print fine - I'm a newbie tho' so u know I haven't tested it fully! Thanks for replying Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.