windtravels Posted July 6, 2011 Share Posted July 6, 2011 Hi, Couldn't see this problem posted anywhere on the boards so here goes: When exporting to pdf (both print>pdf and file>export>export PDF (quartz only) with Vectorworks 2008 SP3 (on a mac, with dpi set to 300) dashed lines that are not horizontal or vertical appear wobbly, not straight as they should be. They follow the correct path but each dash is slightly off the angle it should be, and each at an apparently random angle, up to around 30degrees. This problem seems less pronounced using file>export>export PDF (quartz only) but is still clearly there. Does anyone have any advice with this issue? Its driving me nuts! Thanks. Quote Link to comment
Elite Exhibits Posted July 7, 2011 Share Posted July 7, 2011 Been a bug for some time ... set the dpi up Typically we set it to 1200 You may also find it easier to "Print" the pdf vs Export - Peter Quote Link to comment
windtravels Posted July 7, 2011 Author Share Posted July 7, 2011 Thanks for the reply. Ah, I was worried that might be the case. Will try upping to 1200 as a work around then. Cheers! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.