Ride Posted May 16, 2011 Share Posted May 16, 2011 On occasion when I use the walkthrough tool I get a really skewed view of the model....where all the axis look like they're stretched somehow. Other times I get a proper perspective of the model. What setting is wrong? Sometimes - the walkthrough tools works fine, then all of a sudden it changes to this skewed view, and I can't get it back to normal. What am I missing? Thanks! Quote Link to comment
CipesDesign Posted May 16, 2011 Share Posted May 16, 2011 This occurs when there is a large difference between the Viewer Height (height of Eye) and the Look To Height (height of what you're looking at). The easiest way (for me) to control this is to start with a view from either a RW'S Camera or the Set 3d View Command, making sure that both heights are the same, or close to the same. Try starting with both set to 5ft, then fiddle with it from there. I can usually tolerate a difference of about 3ft (eg: camera/eye height = 5ft/ look to = 8ft) before it starts to bend my brain... Quote Link to comment
Ride Posted May 16, 2011 Author Share Posted May 16, 2011 Thanks for your reply. And thanks to the guys at Resolve - it turns out the set perspective setting was way off. I set it back to normal perspective and all is well. Thank you Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.