VincentCuclair Posted May 21, 2010 Share Posted May 21, 2010 Is it possible to print hairline straight from a DL? is there a setting for this somewhere? Quote Link to comment
VincentCuclair Posted May 21, 2010 Author Share Posted May 21, 2010 (edited) ...all lines one pixel thick......as it is on screen with line weights off..... Edited May 21, 2010 by Vincent C Quote Link to comment
Ken Posted May 21, 2010 Share Posted May 21, 2010 Even with Zoom Line Thickness off, VW shows heavier lines with greater than one screen pixel thickness. There's no global way of printing EVERYTHING just one pixel thick, but you can create a VS command to (temporarily) convert all lines to whatever thickness you choose. I believe 0.03mm is the thinnest. It involves the GetLW and SetLW functions. There was an excellent but long script floated around the email list to do just this a few years ago. I think it was by Willis. Quote Link to comment
Diamond Posted May 22, 2010 Share Posted May 22, 2010 BTW Vincent, If you print at 0.03mm line thickness, you will find that these lines will fall off any photocopies of prints. Dangerous on site with contractors. Now I make sure my hatches or similar are set to at least 0.05mm line thickness. If you have all line weights set by class, you can set them to 0.03mm, print, and then set them back to the class standard. Quote Link to comment
Ray Libby Posted May 22, 2010 Share Posted May 22, 2010 What exactly are you trying to do? Quote Link to comment
VincentCuclair Posted May 24, 2010 Author Share Posted May 24, 2010 This....... Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.