higgins Posted August 24, 2009 Share Posted August 24, 2009 Hi all! Okay, I have a very small and simplistic site model and I need to model a pond there, so, I thought to try my hand on the pad and fence tools... I can get the contours to change pretty much as I like, but for cut & fill volumes I get a confusing message. Okay, my lowest pad is below the lowest contour line that I have, so the contours aren't perfect, but I get the same error when I simply build a small elevation on the model, so, this can't be the issue. What am I doing wrong? Quote Link to comment
islandmon Posted August 24, 2009 Share Posted August 24, 2009 Cut&Fill makes comparisons between the contours via sections. If the site sections are un-closed polygons then a 'solids' error will result. The Site Model must be closed before the Cut&Fill Procedure will work. There must be a hole in your datum... Quote Link to comment
higgins Posted August 25, 2009 Author Share Posted August 25, 2009 Thanks for the reply, but to test it, I drew a bunch rectangles inside one another, made them 3d polys and elevated them to a small rectangular hill... When I modify that, I get Cut Volume 0.0000 Cu M. Still no good. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.