g_arch Posted June 22, 2009 Share Posted June 22, 2009 Hi all, I've just recently encountered a problem with the door tool, not quite sure why as it was working perfectly fine so far. When I insert a door (in plan view), it creates the break in the wall, shows the jamb but not the door itself. I made sure the Show 3D Open was checked in the OIP, tried changing the class for the parts as suggested elsewhere in the forum, to no avail, the doors are still not appearing. Anyone has an idea why? Thanks! Quote Link to comment
Jonathan Pickup Posted June 23, 2009 Share Posted June 23, 2009 with out looking at the file, i can't even guess. I hope you have tried turning ALL the classes on.. Quote Link to comment
mike m oz Posted June 23, 2009 Share Posted June 23, 2009 Also make sure you don't have the Configuration set to Cased Opening. Quote Link to comment
Guest Wes Gardner Posted June 23, 2009 Share Posted June 23, 2009 Also make sure you're in TOP/PLAN view (for 2D), not TOP view(for 3D) See examples Quote Link to comment
brudgers Posted June 23, 2009 Share Posted June 23, 2009 Turn on the "Sills" class. Quote Link to comment
g_arch Posted June 23, 2009 Author Share Posted June 23, 2009 Thanks for your tips, it was the sills class. Usually is always on, no idea why it turned itself off! Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.