Jump to content

NURBS Loft


Recommended Posts

You have NURBS surfaces - the loft requires NURBS curves.

I'd approach the model a little different.

I'd draw the oval, then extrude it a little higher than the desired height (allow for trimming). Use subtract solids to cut the two holes through the model. Then, use the two NURBS surfaces to split, or section the model. Delete whatever exists outside of the necesary object.

Link to comment

Katie's method works, but VW can also provide what you want. Use the extract curves tool to get the edges of the big shapes. This makes a group of the two edges. Enter the group and use the loft tool, no rail mode - click each curve with the tool and you will see a bar between them. Pick "Ruled" in the dialog box and click the go button (or press Return). Repeat for each of the pairs of circles for the holes.

-B

Link to comment

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Guest
Reply to this topic...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

×
×
  • Create New...