compusam Posted September 20, 2007 Share Posted September 20, 2007 Batch Convert (convert old VW files to VW 2008 version) does not seem to be working consistently. Some times I can scan a folder with hundreds of files (not all of them are VW files) and maybe one or two files will convert even though there are dozens of VW 12.5 files in the folder. Some times the report at the end of the scan says zero files scanned, zero files converted even though there are several VW 12.5 files in the folder and sub-folders. Anyone else having problems with Batch Convert in VW 2008? Have not had these problems with previous versions. Quote Link to comment
Guest Posted September 20, 2007 Share Posted September 20, 2007 Is this a local folder or network folder? You may need to contact Tech Support directly for this specific issue. Quote Link to comment
compusam Posted September 20, 2007 Author Share Posted September 20, 2007 This is a local folder and I have had the same issue on 2 different computers. Quote Link to comment
Guest Posted September 21, 2007 Share Posted September 21, 2007 I'm looking into this. Quote Link to comment
Administrator Pharr Posted September 22, 2007 Administrator Share Posted September 22, 2007 I believe there is a known issue with batch converting in place while renaming files. Try saving the results to a new directory and see if that allows you to proceed more successfully. Quote Link to comment
compusam Posted September 22, 2007 Author Share Posted September 22, 2007 I tried your suggestion to convert to a new directory and the results were interesting, but not successful. Fortunately, I tried this experiment on copies of files as opposed to the original files. Here is what happens: I have a folder with 14 VW version 12 files and no sub-folders. When I select "convert in place," the dialogue box identifies 14 files and begins the conversion. When the 8th file is converted, the conversion stops and the conversion reports 14 files were identified, 8 files were converted, 0 files not VW files, 0 errors, etc. So 6 files are skipped. All of the original VW12 files can be opened in VW2008 by way of the file menu so the files are not corrupted. Now, using the same VW 12 files and performing a "batch convert" to a different directory, the conversion dialogue box identifies 14 files and converts the first 2 files successfully, the 3rd file is converted as the 2nd file with "_VW12" added to the file name. The 4th file is converted as the 3rd file with "_VW12" added to the file name, and so forth to the end. In other words, I end up with a folder of 14 converted files (2 files convert successfully and 12 files are the same as file #2 with "_VW12", "_VW12_VW12", "_VW12_VW12_VW12"? etc. appended to the file name. And, what is worse, the name of the original #2 file is changed to include the "_VW12" addition to the name. Needless to say, I would not attempt "batch convert" on original files until this is sorted out. The results are different and un-predictable on other folders with a different numbers of files and with sub-folders. I contacted technical support and I have sent a copy of my 14 file folder to see if they can reproduce the problem. It is also entirely possible that my system is the culprit and not VectorWorks, however, I can reproduce the problem on 2nd computer as well. Quote Link to comment
Molly Sasso Posted October 11, 2007 Share Posted October 11, 2007 Hi, I'm trying to reproduce this problem. I have several questions and items that I would like to obtain from you when you have some time. Can you email me the Batch Conversion Log that is created when this problem occurs. What are the options you have turned on for Batch Convert? Include Subfolders? Convert in Place? Convert layer links into viewports? Convert Referenced Layers into Referenced Viewports? Molly Sasso msasso@nemetschek.net Quote Link to comment
Petri Posted October 11, 2007 Share Posted October 11, 2007 I've reproduced the problem several times... Eg. like this: Include Subfolders? YES Convert in Place? NO Convert layer links into viewports? NO Convert Referenced Layers into Referenced Viewports? NO Quote Link to comment
Molly Sasso Posted October 11, 2007 Share Posted October 11, 2007 Petri, Can you email me: The Batch Conversion Log? Several of the files that failed during the conversion? Molly Sasso Quality Assurance Specialist msasso@nemetschek.net Quote Link to comment
Administrator Pharr Posted October 11, 2007 Administrator Share Posted October 11, 2007 (edited) I believe most or all of these problems are addressed by the VW 2008 Service Pack 1 release. Please try that if you are having difficulty and let us know the result. Thanks, Paul Edited October 11, 2007 by Pharr Quote Link to comment
Petri Posted October 11, 2007 Share Posted October 11, 2007 I'll give it a go. (Do I have a choice!) Quote Link to comment
Molly Sasso Posted October 12, 2007 Share Posted October 12, 2007 I found what causes the appending of the "_VW12", "_VW12_VW12", "_VW12_VW12_VW12"? etc. Open a VW file created in a previous version of VW in VW2008, you will get the dialog "This file was created with an older version...." at the bottom of the dialog is a Settings button. Select the Settings button, you will get another dialog "Keep the original file name with the:" and you can select from "Original File" or "New File" if you choose "New File" and then attempt to Batch Convert you will get the appending "_VW12", "_VW12_VW12", "_VW12_VW12_VW12"? etc. So as a work around for now, only choose "Original File". Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.