Jason4 Posted May 11, 2007 Share Posted May 11, 2007 (edited) 1.How can I pan or zoom in on a drawing in a viewport? 2.How can I turn off the view port outline or make invisible?Thanks Edited May 11, 2007 by Jason4 Quote Link to comment
Ray Libby Posted May 11, 2007 Share Posted May 11, 2007 1. Panning and zooming works the same in sheet layers as design layers. What exactly do you mean by "in a viewport"? 2. In the Attributes palette give your viewport crop object a none fill. Quote Link to comment
P Retondo Posted May 11, 2007 Share Posted May 11, 2007 . . . a "None" fill and a zero lineweight. By panning and zooming, if you're an AutoCAD user, you probably mean scaling and moving the viewport boundary. In VW, panning and zooming the screen view does not change the scale or boundary of the viewport, you have to do those things by changing the scale of the VP in the OIP, and by actually moving the VP crop boundary. Once you get used to the way it works, it's as good or better than the ACAD system. Quote Link to comment
eas Posted May 11, 2007 Share Posted May 11, 2007 So how do you manipulate the viewport? I have given up and when I need a new view just draw a new viewport. But I get the idea from you post that maybe one could change the scale to something much larger in the OIP, reposition the viewport and then change the scale back. Or do you have another way of doing this? (So far not convinced it is better than AutoCad. I spend a lot of time focusing on how VW is _different_ and has lovely qualities all its own.) thanks Quote Link to comment
Ray Libby Posted May 11, 2007 Share Posted May 11, 2007 Right click on the viewport and choose Edit Crop. You can now move or resize your crop object to another part of your drawing. In VectorWorks Preference if you check "Show other objects while in group you can see the drawing outside the boundaries of the crop. Quote Link to comment
Guest Posted May 11, 2007 Share Posted May 11, 2007 You can also use the Translate View tool to pan around within the crop. Often times, we need the crop to say in the same place for page layout purposes, but want another area of the drawing visible within the crop window. The Translate View tool allows you to do this. It works just like panning. Quote Link to comment
P Retondo Posted May 11, 2007 Share Posted May 11, 2007 You can also use the Translate View tool to pan around within the crop. Often times, we need the crop to say in the same place for page layout purposes, but want another area of the drawing visible within the crop window. The Translate View tool allows you to do this. It works just like panning. Katie, you just made checking this board worth it for the last week. I was going to say that the lack of this capability was the one thing ACAD had over VW, but not so! And Ray, your tip about using "View outside group" is another great one. I note that this doesn't work for Section Viewports. I'm also curious - when I translate a plan view in a viewport, the section line indicators stay in place as part of the annotations. Does that mean that the corresponding section viewports are going to change? BTW, if I am looking for something in a Design Layer, rather than change the Viewport scale, I just remove the crop or make it larger. Having the crop shape be independent of the Viewport object is a key structural adavantage over ACAD viewports. Quote Link to comment
nicolas d Posted May 11, 2007 Share Posted May 11, 2007 pete, i don't feel as happy as you for knowing that the 'translation view' tool can be used to pan around within the crop of a viewport, because i don't think it works that well. i think it feels slow and imprecise, which is exactly what's not needed in a situation like this one. i always used this tool, which was part of the 3D palette in previous versions of VW when viewports did not exist at all in the program, to move up and down or sideways when viewing a 3D model. in my opinion, panning the contents of a viewport should be one more of the options available when right clicking on it, besides editing the crop, the annotations, or going back to the design layer. i would call it something like 'edit design layer withing crop'... (in fact, it would be nice to be able to do more than pan the design layer withing the crop, it would be nice to able to work properly on the design layer BUT through the window of the viewport, in this way i wouldn't have to leave my sheet and go back to the whole design layer to edit an object which is there seating in different coordinates alongside many other objects that are not of my interest at that moment). 1 Quote Link to comment
Guest Posted May 11, 2007 Share Posted May 11, 2007 Nicholas, I don't quite understand your position on the translate view tool. When it comes to panning in VPs, it works identical to panning in a design layer. Do you have a specific example/file where it behaved anything different from panning? It does work a little slower than panning, but that is all dependant on the dpi of the viewport. I do notice a slight delay more on a Mac than Windows, but that could be a matter in the computer details. Quote Link to comment
Jason4 Posted May 11, 2007 Author Share Posted May 11, 2007 Thanks I got it working,but If I pan inside the viewport I notice the dim's don't move with the drawing,Is there a fix for this?I tried to fix this by doing the dim's in design layer,but after creating a viewport only the drawing shows up in the sheetlayer.Thanks Quote Link to comment
P Retondo Posted May 12, 2007 Share Posted May 12, 2007 Jason, Dimensions in the Design Layer will show up in a Viewport if their class is turned on. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.