hpryor Posted January 27, 2000 Share Posted January 27, 2000 I'm using Power Mac and MiniCAD 7.0.1. When I try to export A file as PICT my machine locks up. Any advice? Quote Link to comment
Guest Posted January 27, 2000 Share Posted January 27, 2000 You will want to Update to at least 7.0.3 of the MiniCAD 7 program. This was the last update before we moved to the newer version which is VectorWorks. Also depending on the size of the image you are trying to export and the amount of memory you have on your computer you should be able to export. For a test you should try exporting a small image such as a box. If it does export then it is most likely a issue of memory or even with just that file. If you are still having problems after updating and making sure the memory is allocated correctly, contact Tech support either by calling, faxing, or sending us a email. Quote Link to comment
Guest Posted January 27, 2000 Share Posted January 27, 2000 The first thing to try is Updateding your software. The MiniCAD 7.0.3 may solve you pict problem http://www.diehlgraphsoft.com/support/MiniCAD/software/703.html go to this link to download the 7.0.3 once you have ran the update make sure that you give the new software enough memory to do the job. ------------------ Shawn Waithe Diehl Graphsoft inc. Tech Support Manager Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.