dontevenjoke Posted January 2, 2007 Share Posted January 2, 2007 Hi, I have 20 layers and am trying to rotate all of them so my whole drawing is rotated. I have tried to select all with Show/Snap/Modify Others and then rotate, however only 1 layer and/or object rotates. What have I done wrong? Thanks in advance...dontevenjoke Quote Link to comment
dontevenjoke Posted January 2, 2007 Author Share Posted January 2, 2007 I have found if I erase the offending layer/object all other objects can be rotated. Does anyone know why? Quote Link to comment
Petri Posted January 2, 2007 Share Posted January 2, 2007 1. Why do you have 20 layers? Sounds like an extremely complex or large project. 2. Why do you need to rotate the drawing? In the long run it is better to learn to draw in any coordinate system. 3. I think there is a tool on VectorDepot for this. Quote Link to comment
Jonathan Pickup Posted January 2, 2007 Share Posted January 2, 2007 (edited) I would ask why rotate the drawing? Why not learn to use ViewPorts? They can be rotated on the drawing leaving the original layers where they are. Edited January 2, 2007 by archoncad Quote Link to comment
P Retondo Posted January 2, 2007 Share Posted January 2, 2007 Have you tried "Align Layer Views?" If your active layer is in Top view, for example, and the others are in Top/Plan, you can't select the other layers' objects. Also (see more recent thread) STACK LAYERS has to be disabled! Also, all layers have to be in the same scale, and not contain locked layer links (or other locked objects!), for your strategy to work. Quote Link to comment
dontevenjoke Posted January 2, 2007 Author Share Posted January 2, 2007 Fair Point...I started out aligning the building to the site plan which is a reflection of my Autocad background. The reason I had 20 layers is because I had 5 units stepped down a slopping site, and so I put a story or roof etc., on each layer so I could change the elevation of each townhouse. Is there an easier way to do this? As it turn out, I emailed it to VW support here in Australia, and the roof that was rotating by itself, was corrupted, and when it was erased and replaced, the problem was solved. Have you heard of this? Thanks for your help, Quote Link to comment
Petri Posted January 3, 2007 Share Posted January 3, 2007 The reason I had 20 layers is because I had 5 units stepped down a slopping site, and so I put a story or roof etc., on each layer so I could change the elevation of each townhouse. Starts to make sense. These are quite difficult situations (been there...). With one-storey buildings it might be possible to use classes to separate different vertical components and have each building on its own layer, but with two storeys the resulting file structure is somewhat complicated to handle efficiently. Doable, though, and perhaps still less error-prone than having to adjust the elevations of multiple layers for each building. If the townhouses are identical, then you of course only need to draw & model one and you can "assemble" the overall design with layer links. The "house design" can then be in whatever orientation you wish (as long as you keep it the same all the time). Quote Link to comment
Christiaan Posted January 4, 2007 Share Posted January 4, 2007 Fair Point...I started out aligning the building to the site plan which is a reflection of my Autocad background. And it's an aspect of Autocad which is more intuitive than VW currently. Good news is a rotating coordinate system is at the top of the to do list: http://techboard.nemetschek.net/ubbthrea...66393#Post66931 Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.