Doors Won't Display Properly

[pg3d]

I am using VW Architect 12.5 on a Windows xp machine. I have a basic floor plan drawn on the floorplan layer. I have external walls, internal walls, doors main, etc. classes. My door are on the floorplan layer as the doors main class. I placed the doors in the walls as usual and the break in the walls were created and the door jamb is displayed. The actual door itself flickers for an instant and then disappears. I have checked all through my visibilities and cannot find any reason why they wood not display. I cannot figure out why would only part of the door object display. I have spent more hours trying to figure out this diplay issue than I have drawing the floorplans. I am getting really frustrated and would appreciate any suggestions.

Thanks

Pat

[Guest]

Do you have the None class set to be visible?

Also make sure the class options are set to at least Show Others.

[pg3d]

Yes None class is visible and the class option is set to show/snap/modify others. I have three different panel doors and one flush folding door and all of them display this way. In the 3d view everything displays fine.

[P Retondo]

Turn the class "Sills" to visible.

[pg3d]

Thanks alot Pete. Sills was the problem.