pg3d Posted November 14, 2006 Share Posted November 14, 2006 I am using VW Architect 12.5 on a Windows xp machine. I have a basic floor plan drawn on the floorplan layer. I have external walls, internal walls, doors main, etc. classes. My door are on the floorplan layer as the doors main class. I placed the doors in the walls as usual and the break in the walls were created and the door jamb is displayed. The actual door itself flickers for an instant and then disappears. I have checked all through my visibilities and cannot find any reason why they wood not display. I cannot figure out why would only part of the door object display. I have spent more hours trying to figure out this diplay issue than I have drawing the floorplans. I am getting really frustrated and would appreciate any suggestions. Thanks Pat Quote Link to comment
Guest Posted November 14, 2006 Share Posted November 14, 2006 Do you have the None class set to be visible? Also make sure the class options are set to at least Show Others. Quote Link to comment
pg3d Posted November 14, 2006 Author Share Posted November 14, 2006 Yes None class is visible and the class option is set to show/snap/modify others. I have three different panel doors and one flush folding door and all of them display this way. In the 3d view everything displays fine. Quote Link to comment
P Retondo Posted November 14, 2006 Share Posted November 14, 2006 Turn the class "Sills" to visible. Quote Link to comment
pg3d Posted November 15, 2006 Author Share Posted November 15, 2006 Thanks alot Pete. Sills was the problem. Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.