mickpach Posted June 12, 2005 Share Posted June 12, 2005 I need some help to find out how to print from a mac running OS 10.4 to a HP Desgn Jet 455 CA using Gimp. Any help will be appreciated. Quote Link to comment
0 Kevin Posted June 12, 2005 Share Posted June 12, 2005 In OS10.2 we had to install Gimp to add that functionality. In OS10.3, Apple incorporated Gimp into the OS. I assume that OS10.4 continues where 10.3 left off. Try deleting your 455 from the Print Center, (which was created under OS10.2), and installing a new 455 using IP Printing. Quote Link to comment
0 mickpach Posted June 12, 2005 Author Share Posted June 12, 2005 Thank you for you response Kevin. I'll try that and I'll let you know the results. Quote Link to comment
0 mickpach Posted June 13, 2005 Author Share Posted June 13, 2005 I did what you said and nothing works. I don't know if the problem is with the IP Address. Quote Link to comment
0 mickpach Posted June 13, 2005 Author Share Posted June 13, 2005 Thank for replying Kevin. I'm using the ethernet port and a JetDirect EX. I hope this information can help understand my situation. Quote Link to comment
0 Kevin Posted June 14, 2005 Share Posted June 14, 2005 Well, my setup is using a router. But I seem to remember that if you make a direct connection of two items through ethernet, that the cable must be a crossover cable. Are you using a crossover cable and not a Cat 5 patch cable. Quote Link to comment
0 Kevin Posted June 14, 2005 Share Posted June 14, 2005 What exactly is your setup? Are you on a network. Quote Link to comment
Question
mickpach
I need some help to find out how to print from a mac running OS 10.4 to a HP Desgn Jet 455 CA using Gimp.
Any help will be appreciated.
Link to comment
6 answers to this question
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.