Jump to content
  • 0

HP100 and Spoolsmart



After switching over to Mac OSX Jaguar I found that 2 of my good old standby printers (11x17 and D size plotter) are no longer compatible and upgrades to make them so will run about $1000. As such, I am considering a new printer that will accomodate both needs.

The HP100 seems to do the trick but the VW tech guys noted that their "were" some problems printing D size drawings due to something called SpoolSmart in the HP driver. There is an HP bulletin that the VW tech hooked me up with at

http://h20015.www2.hp.com/en/document.jhtml?lc=en&docName=bpp03857 but I am unclear as to weather or not the problem is corrected. I print 50% of my drawings at 11x17 and 50% at D size so it has to be able to work for me.

If you have any experience with this printer or spoolsmart please advise. Thanks

Link to comment

0 answers to this question

Recommended Posts

There have been no answers to this question yet

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.

Answer this question...

×   Pasted as rich text.   Restore formatting

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

  • Create New...