Send to Surface Error Message

[whitwam]

Everytime I send an object to surface I get this error message. I create a new file and the error goes away but I need to use this file... 

ACTIVE_X_LSP.vwx

[michaelk]

There may be more than one thing going on.

 

1.  When looking at the site in shaded view see how everything looks broken:

 

That's a classic objects too far from the origin problem.

 

Things I would fix:

1.  The user origin and the internal origin are off by about 2.2 million feet in the X direction and 1.4 million feet in the Y direction.  That might be a thing.

2.  On the layer Draft somewhere around X=0 and Y=-2.2 million are 74 circles drawn on the Y plane that look like they were meant to be tree outlines.  Delete those.

3.  There are 3 hardscape objects that look corrupted.  On the top right there is a driveway, a curb, and a pad.  Select any one of those and Zoom>Fit to Objects and you will see that they extend up and to the right many millions of feet.

 

Deleting those 77 objects makes the rendering look much better:

 

Still doesn't fix your problem. 😞 

 

I don't know if the location is outside the array limits and maybe fixing the origin issue will solve it.  I suspect the user origin doesn't matter, but I could be wrong.

 

I'm hoping one of the site model gurus will have an idea.

[zoomer]

For me it looks like this :

 

 

17 minutes ago, michaelk said:

1.  The user origin and the internal origin are off by about 2.2 million feet in the X direction and 1.4 million feet in the Y direction.  That might be a thing.