jomer Posted August 28, 2001 Share Posted August 28, 2001 I am unable to get the Selecon Acclaim 650w Fresnel to be at 7000mm on the truss. Everything else goes to that hieght but not those lamps. They are drawn with a grey body or is that a red herring. Windows 2000 VWSL9 Quote Link to comment
kacey1 Posted August 28, 2001 Share Posted August 28, 2001 quote: Originally posted by jomer: I am unable to get the Selecon Acclaim 650w Fresnel to be at 7000mm on the truss. Everything else goes to that hieght but not those lamps. They are drawn with a grey body or is that a red herring. Windows 2000 VWSL9 At first, I had no problem here, but then I realized I was using the imperial symbol. From a fresh install of the metric libraries, I realized that the Acclaim fresnel seems to be missing its 3d component. I have bug listed it and you will see it in the next release. In the meantime, you can do one of a couple of things. You could install the imperial libraries, and copy the 3d portion of the symbol into the metric library. You could also create your own 3d portion by sweeping part of the 2d symbol. You could also pull in the 3d information from an Altman fresnel. It would be a bit off, but you could scale it to what it needs to be. HTH ------------------ Kacey Fisher Quality Assurance Specialist Integrated Products Group Nemetschek North America [This message has been edited by kacey1 (edited 08-28-2001).] Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.