cad_monkey Posted October 10, 2022 Share Posted October 10, 2022 Is there anyway I can apply an end cap the top off a wall section; or a roof slab too? Seems to only work in plan. As I would like to stop the outer leaf of masonry below the rafter line. While the insulation to underside of the roof needs to stop at roof/floor junction. Any help appreciated. Quote Link to comment
zoomer Posted October 10, 2022 Share Posted October 10, 2022 I think, if you properly set your Component heights with clever hight offsets from overall Wall (by Style or better overwrite locally to not need a new Wall Style) that should work. E.g. brick below Wall Top, insulation above. In case Wall height would not really count real height when connected to a Roof (?) I would set all Wall and component heights (locally) manually. 1 Quote Link to comment
Hans-Olav Posted October 11, 2022 Share Posted October 11, 2022 Regarding Rooffaces you have some conrtol og the edge condition in the Edit coponent dialog 1 Quote Link to comment
Guest Wes Gardner Posted October 13, 2022 Share Posted October 13, 2022 As zoomer suggested, I think your best bet is to do it manually through component offsets Wes Quote Link to comment
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.
Note: Your post will require moderator approval before it will be visible.