Jump to content

ETUD

Member
 View Profile  See their activity

  • Posts

    32

  • Joined

  • Last visited

 Content Type 

Everything posted by ETUD

  1. ETUD
    I cannot export graphic legend drawing as DWG? Only dimensions and texts are visible in DWG. I'm asking for help.
  2. ETUD
    Yes only for single door leaf. Double doors are not able to rotate in or out !!! I really do not understand. Since it is not possible to add user provided 2D components, why is it still in the door settings? This issue is a real problem for 2024. Was it necessary to make this change when there was a flip command?
  3. ETUD
    Then we have to unstyled the doors ...! Iam going back to WV2013
  4. ETUD
    Please review the drawing I sent. I cannot now use the doors I prepared for VW 2023 on VW 2024! This situation needs to be corrected. As you said, if only the door leaf rotates, the "use symbol geometry" option should be added to the door leaf section. An additional symbol should be made inside the door frame.
  5. ETUD
    The door rotation add-on in VW 2024 does not work properly. .Doors with added symbols cannot be flipped in the plan. I request that this problem be resolved urgently please.
  6. ETUD
    The symbol I prepared in advance does not appear in 2024. Even if I select Use symbol, I cannot rotate the door in plan, etc. Untitled 2.vwx
  7. ETUD
    The doors I prepared do not work in VW 2024. Use symbol geometry is not working. Or what should I do to fix this? Untitled 2.vwx
  8. ETUD
    In WV 2024 windows version, Graphic legend still cannot be export as DWG.
  9. ETUD
    I will make leveling concrete on the sloping slab. In this case, the floor must be inclined. How can I do this with the Slab Drainage Tool? I mean, the floor bottom must be sloping, and the top must be flat.
  10. ETUD
    There is a problem when exporting graphic legend to dwg. Anyone else having this problem? Please provide information on this matter.
  11. ETUD
    you can use elevation benchmark tool 210511_hardscape test.vwx
  12. ETUD

    hatches

    ETUD posted a topic in Architecture

    When I apply hatch to material, I don't want to see hatch in the plan. data vis. Even if you do, the same hatch stays in the autocad post. How can I do the top plan without the hatch but in the cross section yes.
  13. ETUD

     

    I am an architect and I want to draw units such as windows and doors as shown in the drawing. Since I could not do this directly with the VW door window tool, I was able to prepare it as a symbol. As a result, I had difficulty with skedule and ID tag. I would be welcome if there are people who can give help and information on this subject.

    Architect Window.PNG

    Architect window.vwx

  14. ETUD

    furniture.vwx

     

     

    I have to make symbols and use the furniture I bought from Archicad with IFC. I cannot cut the units for which I symbolize. I want to use them without redrawing. How can I make these units simple 3D in the figure?

  15. ETUD
    I have problem with wall projection . It is not seen in the plan as seen in three dimensions. I want to make jambs by the window. Jamb is not working on the plan view when I use wall projection.vwx
  16. ETUD

    PDF not working

    ETUD replied to ETUD's question in Troubleshooting

    Sorry it was my computer problem..
  17. ETUD

    PDF not working

    ETUD posted a question in Troubleshooting

    Opps After SP5 upgrading. PDF export is not working as before?
  18. ETUD
    These suggestions are very useful because there is no support in my country. Thank you so much. In my opinion, the 1st alternative is more suitable for wood coating on the inner surface. But for the metal cladding I wanted on the outer surface, this method will work very well. I will work this way and try to reach the result in the picture. I can even give the manufacturer full details. Maybe you suggest a different method in it.😚
  19. ETUD
    Thank you so much. I didn't know that shell was used this way. I am thinking of using wood on the inside and metal on the outside. Like attached pictures and panorams. I will review your work and ask if I have questions. http://view.mylumion.com?p=xxazsqeglnxhipqc
  20. ETUD
    Even I made the crosses class pen style none. No need to make it invisible. Thank you
  21. ETUD
    Thank you... I converted the solid section to 3D poligons and make the crosses invisibal class ... it works for 2D plan . after 3d I have to open the class visibility...okay it works But no way to make Clean 3D even with nurbs?? after cutting.
  22. ETUD
    Thank you anyway. But it is not so easy☺️. I mean after cutting the multiple extruded object crosses happen. I do not want to see those on the 2D plan since I want to keep it as 3D...
  23. ETUD
    I make a wooden facade. I cut the timber , I created to provide the slope. Then I want to see a plain 3d like the previous ones. How do I do without crosses. Can I do that in an other way? wood facade.vwx
  24. ETUD
    SP3 NOT YET DONE ?
  25. ETUD
    (VB-164404 BUG Data Visualization Export DWG). All I can say is that it is a high priority bug.*---- Not corrected!
×
×
  • Create New...