Jump to content

Wes Gardner

Vectorworks, Inc Employee
  • Content Count

    1,055
  • Joined

  • Last visited

Posts posted by Wes Gardner


  1. Hi, do you have "Show Tag in 3D" checked - see attached screen shot near the bottom of the pane.  Make sure to put it in a class and turn the class ON in your viewport(s).  Also, in the OIP for the viewport, make sure "Display Planar Objects" is turned ON - you'll need to do this for each viewport you want your tags to show in...

     

    Wes

    Screen Shot 2017-05-26 at 12.33.54 PM.png

    Screen Shot 2017-05-26 at 12.36.34 PM.png


  2. Hi Beth,

    If the framer does not place studs where you'd like them in the corners, you can simply 1) move the ones it DOES create into the proper location 2) duplicate a stud and place IT where you need it to build your corners as you'd like. (Sorry, forgot to "check" double top plate so the framer only created a single plate).  I've attached a simple framed model as well as the set-up that created it...

    Wes

    Screen_Shot_2017-05-22_at_12_41.42_PM.png

    Screen Shot 2017-05-22 at 12.44.04 PM.png


  3. From your detail, it looks as if the top face and bottom face of the glulam are NOT parallel.  If this is the case, it's likely you'll need to model the glulam and then, as you've suggested, save it as a symbol for repeated installations.

    • Like 1

  4. Here's another option

    The attached has 2 symbols.
    There is the top/plan view. In the 3D editing, there are front and side elevation line drawings created in the appropriate 3D planes.
    In section viewports, be sure that the “display planar objects” option is selected.
    These were easily created using the manufacturer’s DWG line drawings.

    Don't forget to turn off the appropriate classes in the class over rides of the viewports

    Kohler Toilets-2d-3d .vwx

    • Like 2

  5. Hi Sharon,

     

    It's not really an either/or scenario.  You can work with Layers without stories but not the other way 'round.  Your model will build just fine using just Layers.  You may want to head over to the Architecture tab and take a look at the Model Set-Up documentation.  It shows you how to create wall styles that are "Story aware" vs wall styles that just use layers - BOTH are PERFECTLY ACCEPTABLE means of building a model.

    Stories can offer a little more automation when it comes to change management as well as helping with the IFC file format.

     

    Wes


  6. @ Andrew Davies:

    Here's a youtube link.  Luis here on the mother ship has his all tricked out and working... I believe he's been a beta tester for them...you can probably email him if you have questions - Lruiz@vectorworks.net

     

     

     

    • Like 1

 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×