Jump to content

jgmrussell

Member
 View Profile  See their activity

  • Posts

    150

  • Joined

  • Last visited

 Content Type 

Posts posted by jgmrussell

    Pasts Description in Interiorcad. Stephan Moenninghoff

    in 3rd Party Services, Products and Events

    Posted

    Hi Group,

    I apologize for duplicated posts, I am having a tough time figuring out how to navigate to here, wow. Anyway, my question is when I generate a Board List of a cabinet, I used to get proper descriptions, such as sides, stretchers etc. in previous versions if iCad. Now in 21 I'm getting Custom Part in the description box. Is there a setting or way to have part names assigned properly? 

    Also, I want to round up to 1mm. I'm getting measurements of 69.3mm etc. Where can I do this.

    Thank you.

    John

    Part description question

    in General Discussion

    Posted

    Hello group. 

    I normally use Board List from the Documents link to produce my material cultists. In my previous versions of iCad, the Board list would have a description of the part, say Side, Back, Stretcher etc. But in my 21 version, I'm getting Custom Part as the description. Any ideas as to what setting to use? Also, I would like to have my measurements rounded to 1mm. I'm getting measurements like 34.6mm. Thank you.

    John

    540212005_ScreenShot2021-06-02at9_59_08AM.thumb.png.30133dd88c37dfcba2346a7e2b5fd488.png

    Zoom line weight

    in General Discussion

    Posted

    Hi all, I have my line thickness set to 0.13 but when I zoom in to snap to corner etc. the line thickness becomes very big (black) I can't find where I can turn this off etc. Can anybody help with this, thank you.

    Sincerely,

    John

    Screen Shot 2021-02-27 at 10.08.12 AM.png

    Is this the forum link?

    in 3rd Party Services, Products and Events

    Posted

    Hi Stephan,

     

    Thank you for your reply earlier to my questions. Is this the place to post?

    I do see 'counter profile' as you suggested for the extra length on rails to accommodate the tenons. Where do you input the extra length? One suggestion if there is none, is when you click on rail, a rail icon appears with say a dashed line at both ends to show tenons, then you click on tenon and input a length. 

     

    I also have a question on finished side panels on a cabinet. It seems you can only make this using custom parts. Once it is make and attached to cabinet, how do you make it show when you print out the board list?

     

    Thank you.

     

    John

    InteriorCad 2017

    in General Discussion

    Posted

    Hi all, great updates and thanks you for that. I'm about to update to 2018 VW and iCad. Still, as I said originally, using 2014. I'm not using any cnc parts of software, just need to draw a nice kitchen/cabinets/furniture etc. and get an accurate cut list. Shame i don't use more of the software, but it works. I'll still keep a 2014 backup to fall back on if needed. I do feel that if we all stopped buying the software until it was perfect, Extragroup might go out of business lol.

    Let's try to keep in touch and support this awesome software, cause I ain't learning a new one at my age!

    Sincerely,

    John

    2017 MBP compatibility with VW2014 and 2014 iCad

    in General Discussion

    Posted

    Hi all, I'm still using VW2014 due to iCad 2014 not being useable for me at least, since that release. I do however want to upgrade my 15" mbp to latest 2017 version with latest graphics etc. My concern is that it MAY not work with VW2014. Anybody using it with any issues? Also, for all the iCad users here, I would like to put together a request/plea with iCad to implement the features that were in 2014 but not yet in 2018, esp. frame and panel doors. if you could sent me your email with any request on it and I will froward to them. I don't want to have to learn a new cabinet software program.

     

    Thanks,

     

    John

    VW 2014 and OS High Sierra

    in Troubleshooting

    Posted

    Hi all, well I went ahead and installed OS High Sierra. I use VW 2014 because I use it with InteriorCad 2014 which by all accounts was the last useful version until they finish reworking the code etc. on newer version etc. So I was able to draw with it but i am getting the perimeter of the page flashing when i move the mouse and when I drag something it is not smooth. Is anybody else having this issue and is there any chance that VW1024 would be updated to work with OS HS? 

    Thanks for any feedback.

    John

    Dimension issue

    in Troubleshooting

    Posted

    Good morning,

     

    Thank you for your help and yes, I did have grid snap active, duh. I don't normally design in front view so I had a bit of a learning curve (custom doors) 

     

    Take care,

     

    John

    Dimension issue

    in Troubleshooting

    Posted

    Good morning all,

    I'm having an issue with dimension tool. I'm drawing a door and need to measure parts. When I click and drag cursor the dimension is fine until it touches the other line, then is becomes a larger dimension, but once I drag back from line it goes back to normal. It's very frustrating and I hope there is an easy fix. It was working perfectly earlier and I'm not sure what i did to make this happen. I'm using VW 2014 updated.

     

    Thank you for any help.

    John

    InteriorCad 2017

    in General Discussion

    Posted

    Hi all,

     

    I'm a long time user of interiorCad. I'm still using v. 2014 and although I have VW 2105 I did not upgrade due to alot of issues with later v. of iCad. That being said, I'm looking to upgrade and I would like to see how any users are finding the latest versions sep. 2017. I did look at some videos on youtube and it looks promising. Any thoughts or feedback you be appreciated.

     

    Thank you.

     

    John

×
×
  • Create New...