Arch
-
Posts
36 -
Joined
-
Last visited
Never
Content Type
Profiles
Forums
Events
Articles
Marionette
Store
Everything posted by Arch
-
Thanks very much! That will help no end!
-
I would like to know how to write the script for copy an object and then delete that object! Any help would be appreciated. Thanks
-
you can do that in the workspace editor for previous view and next view!
-
check on the top line above the drarwing when you have the cursor selected that the line with arrows on both ends is depressed. This sometimes switches off all on its own accord for me!
-
I have tried a similar layout and I haven't found a problem! The only thing that can be wrong is that all the end points aren't touching! Try using the connect/combine tool with the 2nd preference checked on the top line (dual object connect) to join the walls. This will make a polygon of all the walls and hopefully fill them properly too!
-
you can also double click on the eyedropper tool and check the boxes that say set as default and record. This will make the class active and then if you go to the classes menu that class is selected and easy to turn off! You then have to change what the current class is though!
-
thanks very much!!
-
Anyone out there know what the vectorscript is for pan so I can put it on my context click menu? Thanks
-
just answered my own question - just rotate the viewport!!!
-
Is there any way that I can set up a viewport that rotates the shown drawing by a specific angle without changing the design layer drawing? An example would be to fit a drawing on an A1 sheet by rotating the view when the original North South orientation doesn't fit so the viewport will show the drawing with the North South orientation at say, 45?. I hope this makes sense Thanks Dee
-
There is a tool on vectorbits.com that will do just this!
-
You can! Choose the eye dropper tool and then go into its settings and tick the boxes that say 'pick up sets defaults'.
-
the help menu (or F1) should bring up the internet - if this is any use to you?!!
-
As far as I am aware patterns do not translate in AutoCAD. You have to draw everything in hatches which translate ok
-
its under the rectangle command
-
I too would like to know an answer to this!
-
I had drawn them as decorative hanging tiles and trimmed them to the lines......well nearly all of them! Is there any way to determine which ones are the offending arcs as there is quite a bit of decorative tile work.........in hopeful anticipation!!!! NNA can you please iron this out as it never seemed to happen with the older versions!
-
On a few occasions when drawing a number of arcs the drawings print out with lines and arcs all over the place. These are not seen on the drawing itself! This is most annoying as you can imagine. I have even copied over arcs from a drawing without the problem and these mysterious lines have appeared on the new drawing! They ruin the drawing and there is no way that they can be issued to Clients! Any answers please? Thanks
-
you should ask for the file in R14 format - this could be read by 8 so there shouldn't be a problem with 9!
-
In the resource browser pull down menu for drawings "favorite" is always grey! You may have to add drawings to RB which will then add them to under favorite which is done by clicking on the arrow next to files and folders on the top and then "add new favorite files". I think this is what you mean!!??
-
Jonathan, I am using VW 11 but not Architect! I have the roof on the same layer as the walls and its when I try to 3d reshape the walls when I come across the problem of the walls reshaping from a peculiar point in space to form a "W" shape. It's very trying as in the past the only way that I have been able to "fix" the problem is by drawing a polygon and extruding it!!! Thanks
-
I am trying to reshape a wall to create a gable to meet a roof which I created using the roof face command. The problem that I have is that sometimes the walls use an "origin" point well below their supposed bottom plane! This then creates a wall that is "W" shaped. I've checked its siting in space and all things in the OIP and now I am stuck!!!! Please help!
-
this may be due to the keyboard shortcuts assigned in mac os10 that can be found in system preferences - which can be turned off.
-
try vectordepot.com - there are some hatches available there that may suit
-
If all the lines have touching ends you can also use Tool>Compose when they are all selected which will turn them into a polygon.