Jump to content

KenH

Member
  • Posts

    31
  • Joined

  • Last visited

Everything posted by KenH

  1. Hi. I would be grateful if someone could tell me how I can stand a design cube onto its point. I have design the six sides of the cube and grouped them. I now need to stand the cube onto it point. I have going round this issue for the last 6 hours using every tool to carry this out with success. It would be great to know the sequence to complete my design. Best wishes Ken Haken
  2. Hi everyone. Can anyone tell me how I can generate keyboard shortcuts on my MacBook Pro when I am out of the office. I know Control Five will give me top plan view but I don't have a shortcut for an isometric view. I find its a pain to go to the top of the screen click on the Current Screen arrow to list the different views and then have to go through the entire process again if I want to then show the design in a different ISO view. Any help will be much appreciated. KenH
  3. Dear Jonathan.

    I spent a good time with you a few years back when I was having some issues on my Vectorworks Landscape and have always benefited for your advice.

     

    The last webinar session I watched you stipulated that you are now using a MacBook Pro 2021 with VW. I am using the same now but I have a bit of an issue that unless one have a separate Apple keyboard one does not have a keyboard shortcut to go to the Isometric views.

    All the designers I know are now using the MacBook Pro and I have asked VW to offer the shortcuts on this portable Mac.

     

    As you are one of the leading trainers in VW I wonder if you could use your influence to get the VW engineers to offer this facility? It cannot be much of a job knowing what this CAD can do; it's just a bit embarrassing when I have to sit close with a client in order to go through a project with them.

     

    I would be grateful if I could have your views when you have a few minutes.

     

    Many thanks

     

    Ken Haken


    First Garden Design

     

  4. Many thanks Stephan. I will try it and will come back to you as I'm sure it will help others.
  5. When using my MacBook for designing I am constantly going to the current view window to change the design to an isometric, front, left view etc. Short keys would save an immense amount of time.
  6. I have updated my iMac to the latest MacBook Pro and its very frustrating to have to go the long way round to show a client an isometric view. With the amount of designs now using high-end portable hubs can the engineers look and attach short cuts without a design having to take additional things like desktop keyboards and mice etc? An update will be very much appreciated. Thank Ken Haken
  7. When taking a View/Create View port/Final Renderworks one folding door does not render the door's glazing. Fast RenderWorks and all other doors are perfect. I would be grateful for some advice as to why. Many Thanks KenH
  8. Many thanks to all. Your information has been so helpful. I shall sit and go through BIM courses and get up to date on thjis. Once I source the MacBook Pro with M1 Pro chip and after I have used it on some big designs I will put up my findings. It may be all down to the amount of plant renditions of real plants rather than a few that looks about OK. I usually have to use a real plant and then use Photoshop to cut out the background. This is mind boggling in time but I think its worth it. Sincere thanks again. KenH
  9. Hi Ed. I am running 2022 and I don't have worries over the version not doing anything, only the speed its rendering in. Tell me, which version of MacBook Pro are you using. Is it with the M1 Chip or the M1Pro chip?
  10. Hi Guys. My sincere thanks for all your feedback. To tell you from my side I am becoming slower each year based on memory decline (mine not VW or IT.) I find keeping up with new tools and having to sit and viewing new university courses to find a way to create one thing more than enough out of my day. It may be 'cos I don't use BIM much but working using the the tools I have used over the years. My files are usually over 1.2 GB and I render 10 - 12 camera views in Final Renderworks which are printed and sent to the client to mull over. This is why I am trying to find a solution to stop looking at a roundabout so long. This is why I am looking at the MacBook Pro with the M1 Pro chip. If I am getting this the wrong way round I look forward to any ideas.
  11. Thanks Jeff. It may well be me then. It looks like I need to obtain training in using VWs tools better.
  12. Sincere thanks for your comments Jeff. I don't create landscapes anywhere near to yours but I do have other programs working at the same time., plus email and live internet. I think it might be the lack of RAM but I can't install more. Is your MacBook Pro the latest one?
  13. Hi. I am as passionate with my Vectorworks Landscape as I am with my Apple. The trouble is that rendering my plans in a final Renderworks imagery with its full planting areas I some have to wait 20 minutes for it to render. I purge my files and to generate an image to show my client is now such a slog. I use a 2015 iMac with 4 GHz Quad-Core Intel Core i7, 32 Ram and AMD Radeon R9 M395X 4 GB. Apple tells me I ought to upgrade to the new MacBook Pro and then it will generate things so fast I won't even have time to think. Does anyone have experience of this? I would be grateful for any feedback. KenH
  14. Hi Tom. Your guidance is just what I wanted. My sincere thanks. Kindest regards KenH
  15. Hi Matt and Tom. Sorry Guys I am using 2022 and your image doesn't look anything like my Landscape in 2022. I have tried everything now without success. I can't find a demo in University so am a bit beaten so to speak. If you have any other ideas they will be appreciated. Many thanks KenH
  16. Hi Tom. Many thanks for your comments. I will follow your instructions. I am sure with yours and the diagram from To I will sort it out. Many thanks Ken
  17. Hi Mat. Sincere thanks for your comments. This is really helpful so I have copied and printed the info and will try to replicate it. Ill come back to you once I have all singing and dancing. Kindest regards Ken
  18. I would be grateful if someone could guide me upon how to create this gable 8 pane window. It needs to be 980 at sill height and finish at Eve height of 2400mm with a gable of 36 degree. Sincere Thanks KenH
  19. Hello Tom. My sincere thanks for your guidance. I was so wary of changing things as many of the plant I have created myself as so many of the VW ones are the same 3D illustration. Many thanks Kind regards KenH
  20. I use Landscape 2021. I am trying to set some plants into a raised bed which is above the surface of the surrounding area. I have tried everything to set the plant on to of the raised bed soil without success. Could someone help me please. Many thanks KenH
  21. Can someone tell me where and in which University Course I can find how to create an instructive movie in Walkthrough. I have trawled the course for an hour and the search engine but nothing. Thank Ken H
  22. The Multiple error count is not listed in the Object info window of my 2017 Landmark. I have tried to hide/show but without success. Can anyone help please. Many thanks
  23. Hi Jim. I would appreciate your help. Many thanks Ken
  24. Hi Alan My sincere thank for coming back to me. I have always changed the roof element textures through the Object Info Pallet, as I can stipulate which textures for the different elements. I have followed your advice in the 3 textures under the classes section but it still does not correct the gable ends for the basic solid colour to the brick texture I need. Do you have any other ideas? Your help will be much appreciated. Thanks Ken Roof_Gable_Ends.vwx
  25. Hi Alan My sincere thank for coming back to me. I have always changed the roof element textures through the Object Info Pallet, as I can stipulate which textures for the different elements. I have followed your advice in the 3 textures under the classes section but it still does not correct the gable ends for the basic solid colour to the brick texture I need. Do you have any other ideas? Your help will be much appreciated. Thanks Ken
×
×
  • Create New...