Jump to content

Mike Wright

Member
  • Posts

    219
  • Joined

  • Last visited

Everything posted by Mike Wright

  1. I am unable to re-create it consistently, I will report here if it happens again. To be honest it was pretty infrequent so it may have been fixed and I just haven't noticed
  2. I have experienced the same with two tabs open. The tab is selected but you are in fact editing the other document, seems to happen particularly when swapping in and out of the resource manager. Only solution is to close the original document. Windows 10, VW2019 SP2
  3. On my machine it is: C:\Users\[USERNAME]\AppData\Roaming\Nemetschek\Vectorworks\2019\Libraries\Defaults\Audio Tools I've taken to just editing the XML file contained there as I've had a few issues with 'save type to library'
  4. @Rob Books - full dimensions are available on the dbaudio website
  5. d&b bumpers are pretty simple. I just took the data from the rigging manuals. T, Y, V below:
  6. I often find when importing DWG files from clients that the line weights map to any number of different values. This is especially difficult to correct when symbols are involved Is there a way of setting all line weights in a document to one figure? In sheet layers I can set the line weight scale to make viewports work but this doesn't help in design layers Anything I can do?
  7. Uglycat's solution may work, I ran the updater successfully but only after I had already installed SP2 as a full install.
  8. Any news on this? Updater still does not work.
  9. Hi MJM I just used the photometrics form the Robe page Not a lampy so I'm not really bothered about the accuracy as we only really use them as eye candy https://www.robe.cz/index.php?type=10898&tx_odproducts_f[action]=downloadFile&tx_odproducts_f[file]=robe/downloads/photometrics/picklePatt_photometric_diagrams.pdf
  10. So the official line is that the problem was caused by a corrupted renderworks camera. I have had this before, the solution is to create a viewport with the camera active and render that instead.
  11. Thanks Dan, I tried those steps a couple of times already, file is with VSS tech support just now, see what they come up with.
  12. I have a Spotlight fixture with a gobo applied. I cannot get the gobo to appear in renders in the file that contains it. If i copy the light and focus point into a new file then import the renderworks style and background then the gobo appears again. Anything obvious? VW 2017, Windows 10
  13. It's always done it and it's always frustrated me
  14. Thanks Zoomer, it's a document setting which is why it only occurred in this file
  15. This is very likely a biological error but when I change to any perspective view (in a design layer) I get what looks like a viewport crop. I can expand this but what is shown inside has a ridiculous F.O.V. Not sure what is going on. Switching back to orthagonal sorts the issue VW2018, windows 10
  16. In the right hand pane of the Publish dialogue if you select one or multiple sheet layers you have an 'Options' button at the bottom
  17. @markddCan't believe I didn't know about this part of the convert tool!
  18. I'm using the symbols provided for two epson projectors we have in our fleet. One of the symbols (1755) inserts fine with the projection screen tool. The other (1505) pings a warning that it is not a valid projector symbol and that a load of the measurements are not readable. The thing is the VS_mod data for each is identical except for the names, weights and wattage. I'm stumped! File attached with both models and a standard VW model for reference (VW2018) Epson Projectors.vwx
  19. HI The problem does not occur if I duplicate first The ctrl+drag problem persists after SP1 update
  20. Still not working for me, have excluded VW2019 folder from windows defender Have launched updater independently of VWX Bit dull really
  21. that does not look good, certainly doesn't inspire me with confidence that turning off firewalls is a good idea......
  22. not working for me either, ticket in progress with Tech support
  23. When inserting trusses, if I insert the truss symbol and connect normally, it works fine. If I ctrl+drag the previous truss section on to the end, it flips the truss. See images.
  24. Struggling to connect a hoist to a house point. Have a truss directly below a house point but cannot get a hoist to snap to both. Anything I should be doing. Maybe I got my hopes up too soon!
×
×
  • Create New...