Jump to content

Dubman

Member
  • Posts

    358
  • Joined

  • Last visited

Posts posted by Dubman

  1. I'm getting the same error message when exporting files to dwg. But I am able to open the dwg file with Autodexk TrueViewer with no problems. Only new update was with NVIDIA graphics card driver update I did this morning. But is also first time in exporting to dwg.

  2. Before when I would drag copy an object to the edge of my screen it would automatically move the  page in the direction I'm moving the copy to. But now it stops at the edge if I'm holding a constraint, so now I have to stop & change the zoom to move it where I want. Don't know if there is a new setting for this in VW2024.

  3. I'm having major delays after installing the service pack & even with the new 1.1 pack. Weird thing, after clicking the icon, either the short cut of program folder icon, it is taking 51.72 seconds before I see anything happening on my computer, then when seeing VW starting it them take a total of 2 minutes & 16 seconds to open fully.

    VW2023 on this same computer starts to open immanently & takes 1 min, & 14 seconds to open fully.

    I can not figure out why the delay of anything happening after clicking on the icon 

  4. I'm having issues with long start ups. It is taking 52 seconds before any see any signs of VW starting to open after clicking on the Icon, then a total of 1 min. & 45 seconds to open fully to a default file. I'm going to start making my new default files in 2024 to see if that helps. If not then a new re-install 

  5. Can the View Bar be customized?  I like the compact mode & with the PINed items I've turned off there is space available to make each are wider. Also can I rearrange the order of areas so I can move the Layers & Classes towards the left & Views towards the right?

    • Like 2
  6. 6 minutes ago, Dubman said:

    Never mind Kevin, just got the continuous nurbs surface by using the loft tool, totally forgot about using it, now trying to get your image on it.  Thanks

     

    6 minutes ago, Dubman said:

    Never mind Kevin, just got the continuous nurbs surface by using the loft tool, totally forgot about using it, now trying to get your image on it.  Thanks

    Now I was able to get your image on the continuous nurbs surface at 20' ht. So I can see playing the the image input size & the rendering Mapping setting to get the correct position. Attached is my file showing the continuous nurbs surface & your textured image. Thanks again for the help!

    243081790_BackingSamplev2023v2022.vwx

    • Like 1
  7. 5 minutes ago, Dubman said:

    Kevin, attached is your file with my tries in creating a nurbs surface from a extruded rounded rectangle. I've tried many other ways but kept getting separate nurb surfaces for each radius/curves area & flat areas, not continuous. But I  was able to split a curved rectangle & make a extrude with the curved part at each end for this is what we are going to use because to 360 one would be to expensive. With this extrude I was able to apply your textured image on the surface including the curved ends.

    But still would like to know how you created the continuous nurbs surface that you sent me, that I can not make happen. So attached here is your file with my extrude with image & a rounded rectangle that is were I have been starting from for you to show/explain how you got to the continuous nurbs surface.

     

    Thanks!

    960373664_BackingSamplev2022.vwx 6.39 MB · 0 downloads

    Never mind Kevin, just got the continuous nurbs surface by using the loft tool, totally forgot about using it, now trying to get your image on it.  Thanks

    • Like 3
  8. On 2/24/2023 at 10:07 AM, jeff prince said:


    Everything is easy when you know how to do it 🙂.  Either program can make short work if this task without technical difficulty.  Post the file, the desired texture. And a sketch of your intended outcome.  This will make it easy for one of us will help you out.

     

    alternatively, there are lessons on Vectorworks University which will show you how.

    Jeff, do you remember the name of the VW University lesson for this? I've searched each one last night & still can not find anything for this. Thanks

  9. Kevin, attached is your file with my tries in creating a nurbs surface from a extruded rounded rectangle. I've tried many other ways but kept getting separate nurb surfaces for each radius/curves area & flat areas, not continuous. But I  was able to split a curved rectangle & make a extrude with the curved part at each end for this is what we are going to use because to 360 one would be to expensive. With this extrude I was able to apply your textured image on the surface including the curved ends.

    But still would like to know how you created the continuous nurbs surface that you sent me, that I can not make happen. So attached here is your file with my extrude with image & a rounded rectangle that is were I have been starting from for you to show/explain how you got to the continuous nurbs surface.

     

    Thanks!

    960373664_BackingSamplev2022.vwx

  10. 40 minutes ago, Kevin K said:

    @Dubman yeah, you can't extrude a nurbs curve directly.

    What may prove to be easier for me to explain, is if you could upload your file in a 2022 version and I can sort things out for you, with some explanations...That possible? You can send it to me in a message if you don't want to post it here directly on the forum. 

    Yes Kevin, the file is on my office computer so first thing Monday morning I'll send it VW2022 version in a message to you. I know there has to be a way, I'm just not seeing it. Thanks!

  11. On 2/24/2023 at 10:32 AM, Kevin K said:

    @Dubman...This can be achieved 🙂. You do need to do some quick math so the texture repeats correctly on the image and configure the Object Info data correctly as well.

    I created something close to what you showed in your earlier post, with a sort of rounded rectangle shape....

    So....here we go...I attached a 2022 version file so you can better see how this was done.

    322973398_Screenshot2023-02-24at5_12_01AM.thumb.png.cd1520575d0c29a34d3efa94c0828871.png

    If If you extract a nurbs curve from the top, or bottom of the shape you will get the overall length of that curbs curve.

     

    1611879032_Screenshot2023-02-24at5_11_04AM.png.6de5a95635d1f8afd1920814da9d9c17.png

     

    In this case you can see the length of the nurbs curve is about 80 feet....

    Then, in choosing the image to map to the surface, configure the length widget feature size to match the overall length of the nurbs curve....again in this case, about 80 feet...this way you won't get any overlap from the repeating texture..

     

    2077568104_Screenshot2023-02-24at5_09_53AM.png.3be590c50dd6ead5ee33862b1460c89b.png

     

    ** Make sure to use the texture mapping using the 'Surface UV' option...all the other mapping options don't seem to work very well.

    Also, you will need to mess with the mapping options a bit...meaning the image may come in upside down and not mapped correctly vertically, etc, but you can sort that out in seconds from the OIP.

    There ya have it!  

     

    Kevin, what I'm having problems with is VW will not allow me to extrude an nurbs curve into a nurbs surface. VW tells me There were objects selected that were locked or  are illegal in extrudes and sweeps. I was fighting this before. I started with a rounded rectangle & then converted it to a nurbs curve, but then could not get it to extrude. So I must be making the nurbs curve wrong.  How did you extrude the nurbs curve? I understand the image sizing more now. Thanks

    389660749_imageonsurface.vwx 6.64 MB · 2 downloads

     

  12. Update, Jeff I could not find anything in Vectorworks University on this when searching for it but will keep looking since you say it is there. Thanks.

     

    Elite Exhibits, no it does not repeat  its self, I actually have 2 different photos the Designer was having me place on the backing object to see how much backing we need from looking out the windows in a set house model. 

     

    Before I could try anything mew the production manager saw what we were doing & said no way could they afford a 360 backing, so we are no looking a 2 or 3 different backing locations & from my model had enough info to determine the lengths of each for the windows we will see out of to match the exterior location. But I will be searching the VW University for the tutorial & applying Kevin's info so I can learn how to do this in the future.

     

    Thanks again to you all!

  13. Thanks Pat, that is what I figured out too, just can get the image sized correctly as a texture & apply it on the continuous nurbs surface.  So at least I can get it on the flat areas. Sad thing is others in my office that are SketchUp users say how easy it is to do after I told my boss VW is like Sketchup on steroids.

    Screenshot 2023-02-24 080802.png

  14. I'm trying to add a photo image to a 16' radius by 20' ht. surface which was made from an extruded radius line. I can add the image to a rectangle between the radius ends. No where in VW Help is there anything about applying images to object on what type of object it need to be or how to add to a radius object.

     

    Any help would be appreciated.

     

    Thanks  

  15. Update, today I started working at a production office with everything the same with this computer. Using their Wifi & printer, same crashing happens with VW SP3.

    So I'll have to use VW 2022 until I can figure something out. VW 2022 SP6 prints with out crashing.

    Have not gotten any replay from the 2 service select Support request forms sent.

  16. Update - completely uninstalled Vectorworks even every VW 2023 in the registry. Then downloaded the latest version & installed. Right after installing I opened a file & printed to my HP 7740 by Wifi. This time it made it thru the full printing & the curser turned to the busy curser, then back to normal. but the print dialog window was still open. So I clicked into a blank area of the screen & Crash! No warning just closes fast. 

     

    Before re-installing I tried printing from an older file & got same result, crash.

     

    Go figure, I've just got a contract job that will last 8 months & hoping I can get this resolved before I start.

     

    So far no reply from Service Select

     

    Update - every time I run the VW installer repair for SP2 it keeps installing the 32 bit version & my computer is 64 bit, so not an option. Then I found in my download folder VW 2023 SP1 from my other computer, copied it into this computer, installed, same crash results.

    Then I opened VW 2022 SP5 and it prints fine to both printers, so with my office computer I'll need to use VW 2022 instead of the 2023 version.

  17. Unfortunately Pat the downloader option only lets me download the 32 bit version of SP2 & doesn't look like it gives me the option. I think odd was I anciently selected the repair option & it said the same thing, found & repair one file just like the first time I tried it.

     

    I give up for today & will see what happens tomorrow with the computers.

     

    Thanks!

  18. Well I've un-installed the T120 printer driver & everything I could find in the registry for the T120 & re-installed the printer, rebooted the computer, opened VW to same file & same thing, VW crashes. Go figure 

     

    Now I have re-installed the printer driver from a downloaded HP driver installer app, this one installed the latest driver instead of Microsoft installing the previous version. Same results, VW crashing.

     

    Is there a way to put VW back to SP2 with out re-installing VW?

  19. My home office computer with VW SP3 printed the same file to my HP T120 thru USB cable with no problems, no crashing.

    So I am going to un install the printer drivers & re-install them & see what happens.

     

    My home office computer build

    Windows 10 Pro

    Intel i7-3770 cpu 3.40GHz

    32.0 GB installed memory

    64 bit Operating System

    NVIDIA GeForce GTX TITIAN Black

    HP ZR24w Wide LCD (main) & HP 22eb monitors

    VW & RW 2023 SP3 64 bit

    • Like 1
  20. This is my work computer:

    Windows 10 Pro,  AMD Ryzen (TM) Threadripper 1950X (16 Core, 40MB Cache, overclocked up to 3.6Ghz on all cores),

    NVIDIA Quadro Pascal GP100 3584 CUDA Cores 16 GB HBM2

    Memory 32.0 GB Dual Channel HyperX (TM) DDR4 XMP at 2933MHz

    1 TB M.2 PCle SSD - VW Arch & RW 2023 SP3 - since MiniCad 7 pc  

    BenQ monitor GW2750H Res. @ 1920x1080@ 60Mhz & BenQ GW2760 @ 1920x1080@60Mhz

     

    I do have another computer I will try printing from VW SP3 this morning & reply with results

     

    Thanks!

  21. It printed fine from a PDF & SketchUp to my HP OfficeJet Pro 7740 by Wifi. About a week ago I printed D size to my HP T120 with USB cable from VW SP2 with no problems. So far it is only happening to VW with the new service pack. I have sent a crash dump file to VW support & waiting on their response.

    I ran the VW Updater like you suggested & it said it repaired one file, I restarted the computer & tried printing again with same results. This time I noticed the VW spinning wheel just before the crash, & the crash happens before the VW print dialog window closes.

    Both printer drivers are up to date.

    Thank you for the suggestion!

×
×
  • Create New...