Jump to content

Marionette - Nodes

79 files

  1. Basic Reshape SolidScale in x,y,z

    This Nodes breaks up and scale a 3D Solid Geometry and the result is similar like a 2D Geometry reshaped by the 2D Reshape Tool.
    The Input Geometry (Geometries) have to be grouped. You can input it from symbol or control geometry. 
     
    The Node is designed with some love to detail and make the job in many situation just right. It follows some rules:
    1. reference Point is left bottom back
    2. Overlapping geometries over the zero point to left, back or bottom are handled symmetric. You can use locus points to direct the correct symmetry.
    3. The nodes cut a geometry in 3 parts. the end parts are called "caps". The Node allows to scale the caps or the middle part (in most cases the right mode)
    4. It is necessary the input geometry is a group.
    5. Grouped Objects completely inside caps, will be moved as well
    6. Objects between the caps, will be moved half value
     
    This advantage of this node, is to allow an incredible fast production of a specific type of PlugIn Objects (Reshape in x, y, z direction Middle Part is scaled like Tables, Pillars, Handles etc.)
     
     Movies:
     
    Simple Example (Pillar):
    https://youtu.be/F6BIe8d0mTs
     
    More Complex Example(Window Element):
    https://youtu.be/pJ9R8UWyM7Y
     
    Further Examples:
    https://youtu.be/uRwDU-KTRjw
     
     
     

    551 downloads

       (0 reviews)

    10 comments

    Updated

  2. DomC Nodes

    Attached a vwx with nodes. Some of them already shared as separate files. Also the list is not complete, not perfect and has no warranty of being up to date. Also some nodes may be outdated, obsolet or buggy.
     
    Take note:
    1. I tried to track the nodes with an addition record format
    2. Marionette Nodes are linked to a record format, this record format contains descreption and Other infos from to the node. 
    3. Also this Record contains a rating of the node (internal rating for me) like is this node hard to make, will it be useful for many users or just for one special case etc.
    4. The Record can be linked manually to a node and then the node's Data can be written by a script. Ration Infos logically has to be attached manually
    5. On the document is a worksheet with all nodes listed
    The Info below is originally from the nodes (included original misspelling etc :-)
     
    Node Names
     
    Symbol3D     ObjOnSpace     SymbolPopupSymFolder     SetWallHole     IsMember_already     SortNestedList     CreateDictsV     Sort     RotatePtRoundPt     FibonacciSphere     Wrapper     C_Tangent_to_CC     PtPerpendicularOnLine     CircCircInters     CircleLineInters     LineLineIntersec     Pt to Circle Center     2CircleCenterLine     2Circle_4Pts     Apollonius PCC CCC v1     subPoints     addPoints     PtTangToCircle     Wrapper     Wrapper     Get Z atXY     Grow Radial     is cw     Wrapper     Wrapper     Wrapper     2D Pt Shaker v01     HexCircleGrid     GetPtVectors     GetPolar180     DialogFolder     ExportPDF     ImportSU     function4     GetNextObject     PageBased_mm     VersionInfo     Button     MeshFromPoints     collectObjectOnArea     Any     SetPage     BBox Overlap     GetString     GetString     GetNumber     GetInsideChar     Print     GetMultiRecValue     GetActFile     GetNumDatabaseRow     GetSubCell     GetMultiRecField     Backward     DupInContainer     Solid Intersect List     DupOnAcLayer     DupOnAcLayer     ConvertToGroup     Reset Obj     BasicSolidReshapeScale     NumToRow     ObjByClassAndLayer     Set Class      MinItem     If_     SpaceWithObj     LocusMS     GetPointClusters     ConcaveHull     Create Viewport     Add VP Ann     VP Layer     Set Mrntt OIP Field     Get Mrntt OIP Field     Insert Symbol in Folder     CreateLayer     FilterValues     PtArrayStartEnd     ValuesToSaldo     Vector to Angle     PointRectangle     Wrapper     Eval     Eval     AttachUnit     Color     Custom Pulldown     EnhRectangle     RoundedBoard     2D_BBox_Enhanced     TypeToString     TypePopup     TypeCounter     GetRes     Get Sym Name     Name2Index     Text in Lines     TextBlockInLines     SetDimTextSize     SetTextSize     ListToLabel     TextBlockInLines     RecToTable     OpenDocFolder     GetActFile     ListDir     FileInfo os_stat     DateTime     GetActFile     DialogFolder     PlayMP3     Wrapper     Linear Array xyz     PutByRefPt     SymbolinFolder     Link Text     GetDictValue     Repeat_List     shuffle     shuffle_dup_true     looser     itemsToList     Remove Duplicate Items     UnnestL     GetFiles     Imp ini     Imp txt     Solid Boolean     GetRNames     Concat     MergeList     Flatten List S     LinearDimLight     Change Sheet Title     Get Sheet Title     Get Layer Name     Get SheetL Size     Get Sheet Page N     Manipulate File UTF     Custom Pulldown    
     
    Node Descriptions
    Descreption Insert a Symbol     Returns a List of Objects for every Space     Creates a popup of all Symbols in a Folder. You have to edit Script to change Folder     Set the input Geometry as a Wall hole of an object     Returns isM, if the corresponding object is already in the list Example list1 = [5,10,3,5] list2 = [a,b,c,d] notM = [a,b,c] isM = [d]     Sorts the elements in a list     Creates a Dictionary from an input key and a input value     Sorts the elements in a list     Rotate a Point around the center point     This node creates points on a sphere surface     Draws a parallel line through a specific point     Finds the intersection of two circles     returns the section point from a point perpendicular on a line     Finds the intersection of two circles     Finds the intersection of a circle and a Line     Returns true if two infinite lines intersect, and if so, provides a point where they intersect. The intersection point can be outside of the line segments     Finds the two infinite intersections of a line from center to a point     Resurns the intersection of the Line trough the middle of the Circles     Calculates Two Circles. The First one passes pt0 and pt1 and the pt2,pt2_alt which has the lowes distance to pt3. The second circle pass the remaining point      Returns the tangential Circles which touch the 3 input circles     Subtract two Points: c = a - b     Add two Points: c = a - b     Finds the two tangent points from a point to a circle               Returns the Z elevation of a point X,Y on the specified object     Grow a radius Value of input Points, till they touch others or with a min offset     quecks, if point is part of a cw or ccw direction, needs minimum 3 pts 
     input 2D or 3D Points                    Deletes Randomly Values of Input List. If density is 100 nothing will be deleted     A Hexagonal Circle Stacking lattice     Get 2D and 3D Angles of Points related to one center point     Return the angle and distance to (0,0)     Open a Dialog Box to Choose a Folder     Set Origin and height, width of the page     File Names or Folder Names of the input Directory     Enter your Formula in Input Field     Put This in a Wrapper with another Object. This node Returns the next Object (Stacking Ordner) after this node     A Real value defined in the OIP in document units          An example of how to use the Button widget. When the button is pressed, it will run the script contained in the specified definition.     Draws mesh or output polys from a regular rectangular horizontal grid of points     collects objects, which middle point is on a circle, poly or recangle     Create any value using the python eval function     Set Origin and height, width of the page      Checks on ever obj1 input, if one or more object from input obj2 overlap bounding box      Returns the string between two characters Returns new, string position and length.                    Prints the incoming items into a text object or the python console. The option                           'Run scripts in developer Mode' must be enabled in Vector Works to see the console output.     Returns the Data from a Record field. If the Object input is a list values are concat.     Path of the Actual Document     Gets number of Databese Rows and columns in the referenced Worksheet     Gets the numeric or String value of the referenced cell subrow     Returns the Data from a Record field. If the Object input is a list values are concat.     send to Back     Duplicates Objects in a Container or active Layer     This node performs a boolean operation between lists of objects. The operation will be performed for each possible combination of objects in the lists supplied.     Adds an object to the current layer     Adds an object to the current layer     Convert Symbol or PIO to group     Update the specified object using the current settings and parameter values.     This node will Intersect a Solid in 3 Parts. Cap1, Cap2 and Space. Scale middle (space) or scale caps     Converts as Example 1 to A and 56 to BD.     Creates a Criteria by class and Layer     Assigns a class to the referenced object     Returns the smallest item in the list     If test is true, pass the value to true output otherwise to false output     Returns all Spaces which overlap or touch the bounding box of the objs input     Creates a 2D or a 3D locus object     Detects Clusters of Points     Finds the convex hull of points     Creates a Viewport     Add an Annotation to the Viewport     Add an Annotation to the Viewport     Sets the value of a OIP Field, It uses a search and replace function for the field Name. If you have more fealds with similar names which match the search name it returns error code. Use Reset node after all changes of the PIOs     Get a value from an Marionette Wrapper or PIO     Move Symbol in a Symbol Folder. If no symbol name is inputted or the Symbol do not exist, this node just creates the folder     Creates a Design or a Sheet Layer (OIP Pupup to change layer type)     Extract Values within a specific range     Creates Pt array between two points     [1,2,3,4,5,6] goes to [1,3,6,10,15,21     Converts a 2D or 3D vector to an angle in degrees     Output 4 corner points of a rectangle          Enter your Formula in Input Field     Enter your Formula in Input Field     change input values to right document units     gets the Fill Back color of the node and returns it     A Dialog with 3 Popups     Creates a rectangle with the provided specifications, supports point of reference     3D Quader mit Verrundeten Kanten oder Einfache geometrie     Returns the bounding box's coordinates of the projection of an object on the screen plane               "Type Counter" collects Objects from an input criteria. It count, how many objects from which type there in this criteria.     List of document resources from a specific type     Returns the name of the referenced Symbol. Returns "none" if the object has no name assigned.     Converts as example a name from a dimension standard or a text style to an index number     Creates Text Line by Line, from an Input List     Creates Text Line by Line, from an Input List          Sets the Text Size of a Text Obj     Get Input RowNames and Lines and Attach them to the input text blocks, which have the same name like the row name. Group text objects, which are no fields     Creates Text Line by Line, from an Input List     Returns the value of a data record field.     Open the input Folder in Finder or Windows Explorer. Combine with GetActFile Node to have parent folder of active Document     Path of the Actual Document     File Names or Folder Names of the input Directory     Returns the Value from the Python os stat function     OutputActualDateTime     Path of the Actual Document     Open a Dialog Box to Choose a Folder               Creates a duplicate array of objects in x y or z direction     Moves a Refered Point from a 2D,3D Object to a specified 3D Point 
     for planar obj works in 2D view     Creates a List of all Symbols in a Folder     Link a Text Field in a Symbol to a Record Field     Returns the value of the input dict key     Repeats the complete input n Times     Randomize the input list     Randomize the input list     Deletes Randomly Values of Input List. If density is 100 nothing will be deleted     Input [0]value1,[1]value2 ... output [value1,value2 ....]     Removes the duplicate items from the input list.     Separates a list into its constituent items     File Names or Folder Names of the input Directory     Import an ini file with sections, keys and values     Import a Tab or character separated Text-File     This node performs a boolean operation between lists of objects. The operation will be performed for each possible combination of objects in the lists supplied.     Returns the Record Names attached to the Input Object     Enter your Formula in Input Field     Adds an List to the end of a list     Flattens a list, or list of lists     Creates a linear dimension with standard specifications     Changes the Description value of a Sheet Layer     Returns the name of the referenced layer     Returns the name of the referenced layer     Returns the width and height of the sheet layer     Returns the Number of pages     Open a file at the specified path     A Dialog with 3 Popups    
     

    374 downloads

       (3 reviews)

    1 comment

    Submitted

  3. Reshape Node 2D

    https://youtu.be/vuCvK4OwN80 German Movie
    https://youtu.be/Nm0te1zmpVY English Movie
     
    Structure of the Input:
     
    1. Group with Geometry group (send to back) and Reshape Zone definition (send to front). Best practice is to use a blue smbol without screen plane objects
    2. Reshape Zone group has further groups. Every reshape zones (polygons) is grouped with a dimension object. The dimension is the link to the script. The parameter name is a prefix of the dimension text
    3. Use one of the existing examples to understand the system
     
    Limitations:
     
    1. Supportes not 3D, Chain Dimension, path objects, rectangles. Container objects are not reshaped but moved (like the reshape tool)
    2. user origin has to be set to vectorworks origin
    3. not mix of screen-plane and layer plane. Use all layer-plane
    4.  ...
     
     
     

    Parametric Symbol v2018.vwx

    156 downloads

       (0 reviews)

    6 comments

    Updated

  4. Get Symbol from Folder

    This node returns the name of a symbol chosen via selection dialog with previews of the symbols in the current document. If a folder name is given, only its content is shown.
     
    When dealing with a big number of different symbols with long and possibly names difficult to remember, just click the "Select Symbol ..." (OIP) and visually select the symbol within the dialog window.
     
    Created by ComputerWorks GmbH.
    Compatibility: Vectorworks 2019 and higher.

    147 downloads

       (1 review)

    7 comments

    Submitted

  5. Automated Layout

    Hi
    This Examples shows, how to automatically create sheet layers and viewports from objects of the design layers. In this example, a sheet layer will be created for every exhibition place available on the design layer. It creates a 1:20 close-up from the specific exhibitor's place and an overview plan with a marker of the exhibitors place.
     
    This Network-Template could be used whenever you want to create automatically documentations out of your drawing. As Example:
    - Put a Viewport of every Space Object in your drawing on SheetLayers
    - Put Viewports from Building Elements close-ups (Windows, Doors etc.) on sheet layers
     
    Also this Network contains some very powerful custom nodes:
    1. Enhances BBox, Enhanced Rectangle, PutByRefPoint those are just to save time for calculating width, length and ref point of objects
    2. Function Two (like standard function node with two inputs), SetParent
    (1. and 2. Already available on this forum)
     
    3. CreateLayer
    4. CreateViewport
    5. VP Layer Visibility
    6. Add VP Ann (Annotations in Viewport) 
     
    7. Nodes for getting Marionette OIP Data which is not possible with "Get Record Field"
     
     
     

    144 downloads

       (0 reviews)

    17 comments

    Updated

  6. Curve Map Wrapper

    This is a wrapper that serves a similar function to Grasshopper's Graph Mapper component. To use the wrapper, connect it to a network, give it a minimum and maximum value for its domain range, the number of values you want in your list, and use a Name node to connect a drawn NURBS curve to the hCurve input. When you reshape the curve and run the network, the output list of values will change. You can use these values to shape, scale, array, or anything else in your network. Within the Curve Map Wrapper file is an example of a  railing Marionette object and in the second file there is a vase Marionette object. Both use the Curve Map wrapper. This wrapper can be used in Marionette objects or regular Marionette networks.

    139 downloads

       (0 reviews)

    1 comment

    Submitted

  7. Print Node

    This Node makes debugging more comfortable especially inside wrappers.
    You can select weather if the incoming values will be printed into a text object right under the node or into the python console.
    Time of the execution and type of the items can be printed optionally. I integradet the object type list from the appendix site to translate the type id into a string ( 5 = Polygon... )
     
    You can also define filter conditions as Python statement in the oip of the node. Variable X is replaced by the  values. Check out the example in the VWX.
     

    121 downloads

       (2 reviews)

    0 comments

    Updated

  8. DomC - Import / Export Nodes

    Great nodes to use in real money making projects. PDF, SketchUp, Import csv, import ini 

    104 downloads

       (1 review)

    0 comments

    Submitted

  9. Get and Set Marionette OIP Parameter

    With this two nodes, we are able to set or get the parameter of an Marionette PIO or wrapper.
    Can be used to access the values in the OIP by script or another Marionette.
    The Screenshot shows an example in which every of those pillar is an own marionette PIO (Script as symbol to instance the PIO). 
     
    Note:
    It is not possible to write the parameters via Worksheet. Also it is not possible to read Marionette Object parameters directly into a worksheet. To read Marionette object parameters in a worksheet I recommend to write data into a record format and list those values in a worksheet.
     
     
     

    95 downloads

       (0 reviews)

    2 comments

    Updated

  10. DomC - Operation Nodes

    PutByRefPoint(great, powerful), LinearArea(good), ConvertToGroup (very specific)

    93 downloads

       (0 reviews)

    4 comments

    Submitted

  11. Cabinet in one node incl. Ardis Export

    This node is programmed in Dutch.
    The node is made to convert to a plug-in.
    Not converted, a Top-plan geometry will be visible. If you install the plug-in, the geometry will work as it should.
    Attached an English plug-in. ("AR_Cabinet2019 EN") For the non Dutch 🙂
     
     See screen shots to understand  "Front distribution", "cutout in sides", "shelves distribution"
     
    Enjoy.
     
    ver_2019

    92 downloads

       (0 reviews)

    0 comments

    Updated

  12. Easy Text

    This node combines some of the most important text object features into one node, some of which are now found in the OIP.
     
    Created by ComputerWorks GmbH.
    Compatibility: Vectorworks 2019 and higher

    90 downloads

       (0 reviews)

    0 comments

    Updated

  13. DomC - Text and String Nodes

    10 cool nodes for text and string. Replacing, separating, coloring, Dimension Text Size, 

    79 downloads

       (0 reviews)

    0 comments

    Submitted

  14. Open Database Connection (ODBC)

    ODBC connection is useful for those that have an external database and want to use values from it within Vectorworks. It is also helpful going the other way, allowing users to edit their external database from within Vectorworks.
    These are more advanced nodes that will require an understanding of setting up and working with external databases.

    76 downloads

       (0 reviews)

    0 comments

    Updated

  15. Some Point Nodes

    Hello
     
    I putted some of my geometry-math-point nodes (resource-browser-ready) together on a single file. I started to clean up all my marionette stuff, so I think here is a more secure place to store, as on my desktop :-)

    76 downloads

       (0 reviews)

    0 comments

    Updated

  16. Popup enhanced

    This node makes it easier to create a custom popup. In addition to the index, it also returns the string of the selection.
     
    I think I have seen a similar node from Marissa before. But I could not find it anymore.

    76 downloads

       (0 reviews)

    0 comments

    Submitted

  17. Module Importer for numpy scipy and pillow VW2020

    Importer Nodes for the most used external python packages.
    Tested with VW 2020 SP1, Mojave 10.14.6 and Windows 10

    75 downloads

       (0 reviews)

    3 comments

    Submitted

  18. Align Objects

    This node will take an anchor object and a list of other objects to align.
    The OIP has X and Y position options on how the objects should be aligned.
     
    This node will only align objects in 2D.

    74 downloads

       (0 reviews)

    3 comments

    Updated

  19. Various old nodes

    Hi, These are all the nodes i collected or made myself. HTH
    They are listed under the users i collected them from.
     
    If tiy put these in your workgroup folder in a folder called Marionette and restart VW and update library they will be available in the dropdown menu.
     
    Vwctorworks/(your workgroup folder)/Libraries/Defaults. if these folders fon't exist jut create empty folders so vw can follow to the files.
    Some will be out of date so see how they go.

    74 downloads

       (0 reviews)

    0 comments

    Updated

  20. Story Replicator / Geschosskopierer

    The Story Replicator is a single Marionette Node that allows you to easily store the story structure of one document and replicate it in another - as simple as copy/paste. It does so while preserving all the interconnected information.
    This way you can create new documents and add Story structures already used in other documents without going through the hassle of making a copy of the original file and removing all unwanted content.
     
    Der Geschosskopierer besteht aus einer einzigen Marionette Node und erlaubt Ihnen, Geschossstrukturen von einem Dokument auf ein anderes zu übertragen - so einfach wie copy/paste. Dabei werden alle  miteinander verknüpften Informationen beibehalten.
    Auf diese Weise können Sie neue Dokumente erstellen und in diesen Geschossstrukturen nutzen, die Sie bereits in anderen Dokumenten im Einsatz haben, ohne hierfür die Originaldatei kopieren und diese von allen nicht benötigten Inhalten befreien zu müssen.
     
    Created by / erstellt von ComputerWorks GmbH.
    Compatibility / Kompatibilität: Vectorworks 2020 +
     
    Keep in mind:
    Due to the way stories are structured and interconnected the tool may not be able to replicate every last detail for every situation.
     
    Achtung:
    Durch die Art und Weise wie Geschosse strukturiert und miteinander verknüpft sind, kann das Werkzeug möglicherweise nicht alle Details in allen Situation richtig abbilden.
     
    PS:
    Even though the downloads contain only v2020 files, they can be opened in Vectorworks 2021 and will work there as well.
    Obgleich in den Downloads nur v2020 Dateien enthalten sind, eignen sich diese genauso gut für die Nutzung in Vectorworks 2021.

    71 downloads

       (1 review)

    0 comments

    Updated

  21. Symbol to Group

    This node converts referenced symbol to group using the specified conversion options.
    OIP controls:
    Options
    Don't convert subobjects Convert plug-in and symbol subobjects Convert all subobjects Group (*)
    Keep group (leaves symbol contents in a group - in addition to the usual grouping by Marionette) Ungroup group (ungroups symbol content, but you get the usual grouping by Marionette)  
    (*) Information for Marionette aficionados:
    Due to the nature of the underlying VectorScript command vs.SymbolToGroup(), simply using this.SetLinksObjects() doesn't work. In order to overwrite the network output properly, the following had to be done:
    "Keep group" actually moves all group content into a new group, then deletes the old group "Ungroup group" actually recreates all group content outside the group, then deletes the old group  
    Created by ComputerWorks GmbH.
    Compatibility: Vectorworks 2019 and higher.

    62 downloads

       (0 reviews)

    3 comments

    Submitted

  22. DomC - Record Nodes

    GetRNames(good), RecToTable(powerfull), GetMultiRecValues (specific usecase)

    60 downloads

       (0 reviews)

    0 comments

    Submitted

  23. Get Vertices

    This node returns the coordinates of poly vertices as one list (per poly).
     
    Created by ComputerWorks GmbH based on Get 2D Vertex.
    Compatibility: Vectorworks 2019 and higher.

    58 downloads

       (0 reviews)

    0 comments

    Submitted

  24. Spaces with objects

    This node sorts out all spaces which have a collision with one of the input objects. Can be used to detect, if a space contains a specific object.
    For collision points, the space polygon and the object's bounding box is used. There is a OIP dim parameter for tolerance value.
     
    The vwx contains a quick and dirty test floor plan, nothing real 🙂

    54 downloads

       (0 reviews)

    0 comments

    Updated

  25. Polygon Survey

    A Node which creates Measure Lines in Polygons (Line from every vetex point to every other vertex point).
     
    1. p2p Lines:
      
     

     
     
     
    2. Perpentidular Lines (Perpentidular Line from every poly vertex on every poly edge):

     

     
     
    To sort out needless lines, there are several filters integrated:
    1. Double Lines automatically filtered with an epsilon (p2p is not the same as perpenticular if you look all 15 digits)
    2. Measure Lines, which are identical with poly edges
    3. Measure Lines, which are outside of the polygon
    4. Overlapping lines. If two lines are parallel and both points of the smaller lines are on the bigger line, the bigger line is filtered
     
    5. Filter Lines over and lower than min max values 
     
    6. An Option, to return a number of length (Return first x values). As example if there are measure lines with the length (1.2, 1.2, 1.25, 1.5,) and the value is 1, two lines with 1.2 will be returned. This value is holding on perpendicular and p2p lines. 
     
    Summary:
    Turn off Debug options like "Show Edge", "show Outside Poly", Filter small length (niches) and set "Return first x values" on 1 or 2 to get optimal results. So a normal result will look like this:
     

     
    Attached there are three examples. An Example with spaces, An examples just with polys and an example as PlugIn. PlugIn is good for playing with the options to see changes prompt.
     
     
     
     
     
     

    54 downloads

       (0 reviews)

    0 comments

    Updated

 

7150 Riverwood Drive, Columbia, Maryland 21046, USA   |   Contact Us:   410-290-5114

 

© 2018 Vectorworks, Inc. All Rights Reserved. Vectorworks, Inc. is part of the Nemetschek Group.

×
×
  • Create New...